Samsung AW0529 manual Power Failure, Temperature and Humidity Range

Page 8

Power Failure

Here are a few recommendations that you should follow when using your air conditioner.

If a power failure occurs while the air conditioner is operating,

it is switched off. When the power returns, the air conditioner restarts.

Temperature and Humidity Range

The following table indicates the temperature and humidity ranges within which the air conditioner can be used.

If the air conditioner is used at...	Then...
Higher temperature	The automatic protection feature may be
	triggered and the air conditioner stopped.

Lower temperature	A water leakage or some other malfunction
	may happen if the heat exchanger freezes.

Mode	Indoor Temperature	Outdoor Temperature	Indoor Humidity
Cooling	70˚F to 90˚F approx.	70˚F to 110˚F approx.	80% or less
			If the unit is used for
			long periods at a high
			humidity level, water may
			condense on and drip
			from the surface of the
			air conditioner.

E-8

Image 8

Contents OWNER’S Instructions Safety Precautions Contents Air inlet Outside Power plug Description of Each ComponentAir outlet Air filter Refer to Getting Started To control the direction of the air flow, refer to Cooling Your RoomTurn the Master Control To control the direction of the air flow, refer to below Adjusting the Air Flow Direction VerticallyAiring Your Room Power Failure Temperature and Humidity RangeCleaning Your Air Conditioner Check the cleanliness of the air conditionerSolving Common Problems ProblemSet the Thermostat control to the desired position Close the window, and fill the gapTechnical Specifications Installation Checkpoints prior to installationInstallation instructions 23 toInstallation of the Drain system Tools needed Parts furnished2 type a wood screws Install the window gasket 2 type a wood screwsObligation of the Original Owner Limited 5-Years Compressor WarrantyExclusions of the Warranty