Cooling Your Room
You must select the Cool mode if you wish to lower the temperature in your room. You can also set the Fan speed.
Remote Control | Control Panel | 1 Press the |
| (On/Off) button. | ||||
| ||||||||
|
|
|
|
| Result: |
| ◆ The air conditioner starts up in the Cool mode. | |
|
|
|
|
|
| |||
|
|
|
|
| ☛ |
| ◆ The unit beeps twice. | |
|
|
|
|
|
| |||
|
|
|
|
| The air conditioner is fitted with a protection mechanism to prevent | |||
|
|
|
|
| ||||
|
|
|
|
| ||||
|
|
|
|
|
| the unit from being damaged when it is started immediately after | ||
being:
◆Plugged in
◆Stopped
It will start up normally after three minutes.
2If the temperature is not displayed on the control panel:
◆ Press the 
button on the remote control
or
◆ Press the 
button on the unit one or more times until the temperature is displayed.
Result: ◆ The unit beeps each time you press the 
/ 
button. ◆ The air conditioner starts up in the Cool mode.
➢You can change modes at any time.
3 To adjust the temperature, press the 
or 
buttons on the remote control or unit one or more times until the desired temperature is displayed.
The temperature can be set between 64°F and 86°F.
Result: ◆ Each time you press the | or | buttons: |
–The temperature is adjusted by 1°F and displayed on the control panel
–The unit beeps
◆The air conditioner starts cooling, if the room temperature is higher than the selected temperature.
◆If the room temperature reaches the set temperature, the air conditioner stops cooling, but the fan is still operating.
4To set the fan speed:
◆ Press the | , | or | button on the remote control as desired. |
or |
|
|
|
◆ Press the | Fan Speed | button on the unit one or more times until the | |
desired Fan speed(F1, F2 or F3) is displayed.
5To control the direction of the air flow, refer to page 11.