. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PCMCIA card where it is saved as a sound file. As a result, the card may contain an intermingling of image and sound files.
The camera alone cannot play the recorded sound; instead, a computer is needed to access and play the sound files.
How to Record Sound
To record sound, make sure that a PCMCIA card is in the camera, then turn on and wake the camera (or operate while connected to the AC battery charger/adapter or to a computer that is on), and hold the camera back approximately six inches (15 cm) from your mouth, press and hold the record button, speak into the microphone, and when finished, release the record button. The center dot of the recording level meter (also called the disk indicator) on the camera back LCD comes on when sound is being recorded.
Recording
If the shutter release is pressed while the record button is down, audio recording stops until the image has been recorded. If the record button is still down, the system begins to record sound again.
For simplicity there are no controls other than the record button; there is no volume control, and no way to set the recording level.
Sound will not be recorded while shooting an image burst.
As sound is being recorded, segments of the recording level meter (also called the disk indicator) bounce up and back, serving as a level meter
