. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message | Possible Cause | Suggested Solution |
|
|
|
“Can not save these images because the destination folder or disk is locked, or you do not have ‘write privileges’ to the folder.”
A problem occurred while writing the file. For example, the disk is locked, or write protected, or there is another problem with the hard disk.
Unlock the disk, change write protection, or write the file to another disk if available.
“Can not ‘Take Picture.’ | This is normal operation | Choose another focus mode or try |
of the camera. | to focus on another part of the | |
focus mode and can not |
| subject that allows the camera to |
focus.” |
| focus. |
“Can not ‘Take Picture.’
The camera back may be busy.
The camera can not be electrically tripped.”
This message only | If you are working with an |
applies to the DCS 465. | electrically tripped camera, wait for |
| the camera to complete the current |
| operation and then try again. |
| Or if the camera can not be |
| electrically tripped, you can not |
| use the Take Picture button with |
| this camera. Instead you must trip |
| the camera manually. |
“Can not ‘Take Picture.’
The N90s may be in S focus mode and can not focus.
The N90s may be in P exposure mode and its lens is not stopped down or could not focus.”
This is normal operation | If you are in S focus mode, choose |
of the camera. | another focus mode or shoot from |
| another position that allows the |
| camera to focus. |
| If you are in one of the |
| programmed exposure modes, be |
| certain that you set the lens to its |
| smallest aperture and that the |
| camera can focus. |
“Color balance can not be | An monochrome image | When click balancing, work only |
applied to monochrome | is selected for color | with color images. |
images.” | balancing; color |
|
| balancing can not be |
|
| applied to monochrome |
|
| images. |
|
