. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Working with Images in the Studio

This section is a tutorial on using the camera in a studio setting to take new images.

NOTE: The earlier part of this chapter describes how you can work with images on a PCMCIA card in the camera. All features described there also apply to studio work (and are not repeated below), so we encourage you to review the earlier sections of this chapter.

1.With the camera connected to your computer, access the driver image window as described earlier in this chapter.

2.Choose CAMERA from the SOURCE menu to work with images from a connected camera.

3.Choose TEST SHOT from the VIEW menu. This displays a single image which is always the most recent picture you take with the camera after choosing TEST SHOT.

IMPORTANT: In TEST SHOT, images you take are not saved to the PCMCIA card in the camera unless you click the KEEP button as described below; instead, images are displayed in the image area one at a time. Each new image you take replaces the previous one, which is lost.

6-26  Accessing Camera Images G

Page 130
Image 130
Kodak EOSDCS 3, EOSDCS 5, EOSDCS 1 user manual Working with Images in the Studio