Kodak EOSDCS 3, EOSDCS 5, EOSDCS 1 General problem with An unspecified problem ‘Take Picture.’

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Message Possible Cause Suggested Solution

“General problem with	An unspecified problem
‘Take Picture.’”	has occurred when you
	clicked the Take Picture
	icon.

Close the driver, reopen it and try again. If the problem continues, click the Load Camera Firmware button, and try again. If the problem persists, reinstall the driver.

“No ASPI software for Windows was found. Install or reinstall the

WINDOWS ASPI software.”

A problem has occurred with your software ASPI manager for Windows.

Install, or reinstall, the ASPI manager for Windows. This software, which is not available from Kodak, should be provided with your ASPI Windows host adapter card.

“Some items in this location have the same names as items you’re copying. Do you want to replace them with the ones you’re copying?”

While working within an archive folder, you have selected multiple images, and clicked “Copy To;” however, some images with the same filenames already exists in the folder.

Click OK to replace the archive files with the selected files; or click Cancel and no replacement occurs.

If you click OK, sound files are replaced without notifying you.

“The action is canceled. It can not click-balance because the click point is outside the image border. (The action was recorded on a picture from a camera with a larger imager.)”

When the action is run, the driver is unable to complete a click-balance operation. The picture on which the operation was initially recorded came from a camera with a larger imager, and the click-balance point is outside the border of the image the action is trying to color balance.

You will not be able to use the script with this image.

 Reference — Kodak Driver Software G 8-65