. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wiping the Imager
1.Examine the imager visually. If there is lint on the imager (but not grease, fingerprints, or other dirt), continue at step 9; otherwise continue with the next step.
2.Dampen one corner of the web cleaning pad sparingly with the cleaning solution.
3.Wrap the damp corner of the cleaner pad over the forefinger of one hand.
4.Hold the camera back firmly in place on the flat surface with your other hand.
5.Gently scrub the imager with the damp corner of the cleaner pad; use a circular motion, and move over the entire imager. This action should dislodge dirt and/or remove grease and fingerprints.
6.Wipe off residue on the imager surface by wiping repeatedly straight across the imager with a dry corner of the cleaning pad.
Reference — Camera G
