Kodak EOSDCS 3, EOSDCS 5, EOSDCS 1 user manual Obtain and mount a lens on the camera

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.Obtain and mount a lens on the camera.

Canon EF lenses are not supplied with the camera system, but are available from authorized Canon camera dealers. If necessary, refer to the EOS-1 N Instructions for details on lens attachment. Also refer to the Specifications appendix regarding differences in lens behavior with the EOS•DCS.

2.Obtain one or more supported PCMCIA cards.

PCMCIA cards are not supplied with the camera system, but are available elsewhere. The camera accepts cards that support the PCMCIA “ATA interface and operate in 8-bit mode. Refer to the read- me file on the supplied driver diskette for supported cards.

3.PC customers only: obtain and install — if not already present — a supported SCSI host adapter card.

Supported adapters are listed in Chapter 1; brief installation informa- tion is in Chapter 4.

4.(Optional) PC customers only: Obtain and install a sound board — if not already present — required to play sounds recorded with the camera system.

5.Install the supplied software driver.

A.Macintosh: Load the first diskette for the Macintosh driver. Review its read-me file. Double-click the installer and follow the instruc- tions it presents to install the software. Refer to Chapter 4.

B.PC: Load the first diskette for the TWAIN (PC) driver. Review its read-me file. Run the SETUP program to install the TWAIN driver supplied by Kodak. Refer to Chapter 4.

3-2  Quick Start G