. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message | Possible Cause | Suggested Solution |
|
|
|
“The PCMCIA card in the camera is full. You can:
Enter Test Shot and save images to a folder using the Keep button.
Delete images.”
The PCMCIA card in the camera is full, and additional images can not be recorded on it.
Since the PCMCIA card is full, you can enter Test Shot and use the Keep button to save images to an archive folder.
Or you can switch to Contact Sheet, delete images from the card, and continue shooting. New images will be saved to the PCMCIA card which now has room for new images.
“The PCMCIA card in the camera is full. You can:
Stay in Test Shot and save images to a folder using the Keep button.
Stwitch to Contact Sheet, delete images from the PCMCIA card, then choose Test Shot again.”
You are working in Test Shot and additional images can not be saved to the PCMCIA card. As indicated, the PCMCIA card in the camera is full, and additional images can not be recorded on it.
As prompted, use the Keep button while in Test Shot.
Or, switch to Contact Sheet, delete images from the card, reenter Test Shot and continue shooting.
“The PCMCIA card was recovered, but no images were found.”
You initiated a recover operation which was performed, but no images were found on the card.
No action is required. If there were images on the card, they can not be recovered with this command.
“The required ASPI software is not found. Install or reinstall the
WINDOWS ASPI software, and remove other ASPI software if possible.”
A problem has occurred with your software ASPI manager for Windows.
Install, or reinstall, the ASPI manager for Windows. This software, which is not available from Kodak, should be provided with your ASPI Windows host adapter card.
One or more DOS ASPI manager(s) is installed and is in conflict with the Windows ASPI manager.
Be certain that a WINDOWS ASPI manager is installed; remove the DOS ASPI manager(s).
