. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Using the Camera with a PCMCIA Card

With a PCMCIA card installed in the camera, the unit is portable, and can be used in the large variety of stand-alone shooting situations in which the Canon EOS-1 N can be used.

Images are stored on the PCMCIA card as you take them. The camera will not operate once the PCMCIA card is full. When full, you will need to do one or more of the following.

Use the DELETE button on the camera to delete the most recently made image(s) from the PCMCIA card.

NOTE: The DELETE button does not function when the camera is connected to a computer; use the DELETE button on the software driver to delete images in this configuration.

Attach the camera to the computer, and use a supplied software driver to delete images from the PCMCIA card (after acquiring them from the camera if desired).

Remove the full PCMCIA card and insert another PCMCIA card with space available for additional images.

Using the Camera Without a PCMCIA Card While Connected to a Computer

You can use the camera without a PCMCIA card only if you are con- nected to a computer and running one of the supplied software drivers. In this configuration, the software operates in TEST SHOT view, except that when you click KEEP, the COPY TO dialog box is displayed allowing you to select a folder location to save the image. Refer to TEST SHOT in chapter 8 for more information on this configuration.

If there is no PCMCIA card in the camera, you can only take a picture if the driver image window is opened.

 Reference — Camera G 7-23

Page 161
Image 161
Kodak EOSDCS 1, EOSDCS 5, EOSDCS 3 user manual Using the Camera with a Pcmcia Card