Kodak EOSDCS 5, EOSDCS 3, EOSDCS 1 user manual Drive button

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.Select a film winding mode (Single or Continuous) or a Self-timer mode (2-second delay or 10-second delay) by turning the main dial after pressing the DRIVE button located inside the hinged door on the right side of the camera.

DRIVE button

5.Set the ISO value by turning the main dial while simultaneously pressing the AF and metering mode selector buttons; the specifications appendix lists supported ISO values.

NOTES: ISO values outside these values cannot be set. Exposure compensa- tion values up to +/- 3 steps in 1/3- or 1/2-step increments may be selected at the supported ISO value.

As with film, you may want to use flash to achieve maximum image quality in low light situations.

 Using the Camera G 5-7