. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setting the SCSI ID on the Camera

In this section you will set the SCSI identification (ID) number for the camera. Each SCSI device connected to the same computer must have a different ID number.

CAUTION: This section assumes that the camera and the computer are not currently connected. You should never change the SCSI ID on the camera when it is connected to a computer.

1.Shut down your computer.

2.If SCSI devices other than the camera are connected to your computer, for example a hard disk, determine their SCSI identification numbers so that you can select a different number for the camera. If necessary, refer to the instructions for those devices to determine how to find their numbers.

NOTE: Since you may connect the camera to different computers, or since you may change the external devices connected to the computer you regularly use with the camera, you should ensure that the camera has a unique SCSI ID each time you connect it to the computer.

 Preparing the Camera and the Computer G 4-7

Page 51
Image 51
Kodak EOSDCS 5, EOSDCS 3, EOSDCS 1 user manual Setting the Scsi ID on the Camera