. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message | Possible Cause | Suggested Solution |
|
|
|
“Can not recognize the PCMCIA card in the camera.
Remove the card, reinsert it firmly, and try again.
Confirm that the battery is charged.
Switch to an archive folder.
The card may not be formatted. To format it, click the Camera Control icon, then click the Format button.”
This message occurs | Remove and reinsert the PCMCIA |
when the driver opens | card, then try again. |
and is unable to read the |
|
PCMCIA card in the |
|
camera. A variety of |
|
reasons can cause this |
|
occurrence as described |
|
below. |
|
The card is not inserted |
|
properly in the camera. |
|
The battery needs | Attach the AC adapter and charge |
charging. | the battery. |
The PCMCIA card in the camera is not DOS formatted.
Click the Camera Control icon, then click the Format button to format the PCMCIA card. This action permanently erases any files on the card.
Or, if a second PCMCIA card that is known to be DOS formatted is available, replace the current PCMCIA card with the second card.
Work with an archive folder instead of this problem PCMCIA card.
