. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Trouble | Possible Cause | Suggested Solution |
|
|
|
Pressing the camera | The Canon |
shutter release button | is in ONE SHOT |
does not release the | focus mode and can |
shutter. | not focus. |
Choose another focus mode or try to focus on another part of the subject that allows the camera to focus.
Refer to the supplied
No PCMCIA card is in place in the camera.
Insert a PCMCIA card or operate the camera while connected to a computer as described earlier in this chapter.
The camera is off. | Turn on the camera. |
The PCMCIA card in the camera is full.
Blinking
Delete images from the PCMCIA card in the camera
If connected to a computer, delete images or erase the PCMCIA card with the software driver.
Use another PCMCIA card, if available.
The PCMCIA card is not formatted; “E6” appears on the camera back LCD.
Format the PCMCIA card as described in Chapter 4, and try again.
The battery is low. | Recharge the battery, or operate | |
|
| from the AC battery charger/ |
|
| adapter. |
| Blinks when |
|
| battery is |
|
| exhausted | Full battery |
|
| |
