. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Timing: For all camera models, the camera is ready for the first shot within 0.25 seconds after the shutter button is depressed. Timing for subsequent images depends on the type of PCMCIA card being used, and on the camera model as below.

EOSDCS 1 — If you continue to press the shutter after the first image, the second image of the burst is recorded in approximately 1.6 seconds. Continuing to press the shutter after the second image of the burst records images at approximately eight second intervals.

EOSDCS 3 — If you continue to press the shutter after the first image, subsequent images of the burst are taken at a rate of approxi- mately 2.8 images/second. Continuing to press the shutter after the burst records images at approximately two second intervals.

EOSDCS 5 — If you continue to press the shutter after the first image, subsequent images of the burst are taken at a rate of approxi- mately 2.3 images/second. Continuing to press the shutter after the burst records images at approximately 2.5 second intervals.

Built-in microphone records sound in “.WAV” file format at “tele- phone quality”— 8-bits, 11 kilohertz, monaural.

Built-in, liquid crystal display (LCD) status display.

Two external controls:

DELETE. Deletes most recent image on PCMCIA card (if present). SCSI ID. Sets SCSI ID.

PCMCIA-ATA Type III slot designed to accept PCMCIA hard disk cards that support the PCMCIA “ATA” interface and operate in 8-bit transfer mode.

A-4  Specifications G

Page 268
Image 268
Kodak EOSDCS 3, EOSDCS 5, EOSDCS 1 user manual  Specifications G