. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message | Possible Cause | Suggested Solution |
|
|
|
“Can not recognize the PCMCIA card in the camera.
Remove the card, reinsert it firmly, and try again.
Confirm that the battery is charged.
The card may not be formatted. To format it, click the Camera Control icon, then click the Format button.”
The card is not inserted | Remove and reinsert the PCMCIA |
properly in the camera. | card, then try again. |
The battery needs | Attach the AC adapter and charge |
charging. | the battery. |
The PCMCIA card in the camera is not DOS formatted, or has become corrupted after the driver has successfully accessed it.
Click the Camera Control icon, then click the Format button to format the PCMCIA card. This action permanently erases any files on the card.
Or, if a second PCMCIA card that is known to be DOS formatted is available, replace the current PCMCIA card with the second card.
“Can not save the Preferences file. The system disk may be full, or may be locked, or you do not have ‘write privileges’ to the disk.”
The system disk is full, or is locked, or is write protected, or there is a problem with the system disk.
Create room on the system disk, or unlock the disk, or remove write protection from the system disk, or have the system disk repaired.
