. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message | Possible Cause | Suggested Solution |
|
|
|
“Can not acquire image | This is a general purpose |
‘imageid’ because | message that occurs |
‘reason.’” | when trying to acquire |
| images. |
| For example you might |
| see this message when a |
| calibration (CAL) file is |
| not found for the image. |
Respond appropriately. For example, if the calibration (CAL) file is missing, you must obtain the file (it was supplied by Kodak with the camera used for the picture) and place it in the folder with the image file.
“Can not acquire this contact sheet. The Printable Area (Width and Height) on the Acquire Contact Sheet dialog box is too small to hold even one thumbnail of the Thumbnail Size specified on the dialog box.”
As indicated, the driver can not acquire this contact sheet because the dimensions specified for the contact sheet are too small.
Either increase the Width and/or Height as needed of the Printable Area and/or reduce the Thumbnail Size; then try again.
“Can not complete the Copy To operation because the disk is full.”
You are trying to save a file that is larger than the available space on the selected disk.
Select another disk if available, or delete files from this disk and try again.
“Can not crop image | This is a general purpose | Respond appropriately as suggested |
‘imageid’ because | message that occurs | by the specified reason. |
‘reason.’” | when trying to crop |
|
| images. |
|
“Can not load camera firmware because the file ‘filename’ can not be found. Make sure the file is at the same location as the driver file (reinstall the driver if necessary).”
A file, perhaps the “.BIN” file, was not found in the same folder as the driver file.
Place a copy of the “.BIN” file in the same folder as the driver file. The BIN file is supplied by Kodak on the diskette with the product.
Or reinstall the driver.
