
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Quitting — Disconnecting the Camera from the Computer
Complete these steps when you have completed your work with the camera and the computer.
1.If Photoshop or other supported application is running, quit that application now.
2.If the power switch on the camera is set to on (I), turn off the camera by sliding the power switch to off (O).
3.Turn off your computer.
4.Turn off other SCSI devices if present.
5.(Optional) Disconnect the camera from the computer.
CAUTION: Do not disconnect the camera from the computer while the driver image window is open, or even while the computer is on. Doing so may result in the loss of data from the PCMCIA card in the camera or from the hard disk in your computer. Instead, turn off all equipment in the order described above before disconnecting the camera.
Your camera is now ready to take pictures as described in Chapter 5.