. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

you step through them, resize or reposition cropping rectangle as desired; the change affects the cropping rectangle on all selected images.

First

Previous Go To

Next

Last

H.(Optional) Turn “on” the CROP NEW IMAGES AFTER SHUTTER RELEASE

checkbox (an X appears in the checkbox to the left of this option when on), and the cropping rectangle is superimposed on all new images you take until you return here and turn off this option.

Keep in mind that all cropping rectangles can be revised later at any time as desired.

I.(Optional) Remove the cropping rectangle from all images in the stack by clicking REMOVE.

J.Click OK. The current cropping rectangle is superimposed on all selected images and you are returned to the driver image window.

Close the Driver Image Window (Saving

Changes)

1.Click DONE; the driver image window closes and all changes to settings you have made during this work session are saved.

2.Return to the driver later as desired and perform additional work as described in this or the next section of this chapter.

 Accessing Camera Images G 6-25

Page 129
Image 129
Kodak EOSDCS 5, EOSDCS 3, EOSDCS 1 user manual Close the Driver Image Window Saving Changes