. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

camera or with the selected image archive files. Changes you make in these settings are visible on the images displayed on your computer monitor.

The choice you make is used for color correction by the driver when the image is acquired. The menu provides the following choices.

DAYLIGHT

Uses daylight color-correction values when acquiring the

 

image.

TUNGSTEN

Uses tungsten color-correction values when acquiring the

 

image.

 

NOTE: The Tiffen Hot Mirror filter is always recommended when

 

shooting under tungsten lighting. A filter for one size lens is

 

supplied; filters for other size lenses are available. Without the

 

filter, color results may not be very accurate with a tungsten light

 

source; however, acceptable color rendition can be obtained with

 

this filter under tungsten lighting.

FLUORESCENT

Uses fluorescent color-correction values when acquiring the

 

image.

Flash

Uses flash color-correction values when acquiring the

 

image.

L. Click-Balance Tool

Unlike the lighting menu which provides distinct choices to match lighting conditions under which the image was made, the click-balance tool provides a more refined method of color balancing, and is always the preferred method of applying color balancing to images

The ‘checkbox’ appears on the left of the tool, and the ‘eyedropper’ is on the right.

 Reference — Kodak Driver Software G 8-35

Page 223
Image 223
Kodak EOSDCS 3, EOSDCS 5, EOSDCS 1 user manual Click-Balance Tool