. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message | Possible Cause | Suggested Solution | |
|
|
|
|
“Camera battery is low. | The battery needs | If you are operating without the AC | |
To continue working, use | charging. | adapter but are in an environment | |
the AC adapter.” |
| where power is available, attach | |
|
| the adapter, wait for a short time | |
|
| and try again. | |
|
| If neither a power source nor an | |
|
| adapter is available, you will not | |
|
| be able to complete this operation. | |
|
| We encourage you to charge the | |
|
| battery for two hours before any | |
|
| field operations. | |
|
| NOTES: If the battery in the camera | |
|
| is not sufficient for your needs, | |
|
| consider obtaining a Quantum | |
|
| Battery 5 (QB5). Kodak produces | |
|
| an accessory cable that allows you | |
|
| to attach the camera system to the | |
|
| QB5. (Neither the QB5 nor the | |
|
| cable accessory is supplied with | |
|
| the camera system.) | |
“Camera firmware was | You clicked Load |
loaded successfully.” | Camera Firmware; the |
| operation was successful. |
Click OK; no other action is required.
“Camera ‘Self Test’ | The self test you initiated |
completed successfully.” | completed successfully. |
Click OK; no other action is required.
“Camera ‘Self Test’ failed. | An unspecified hardware | Try again. If the problem |
Click the ‘Load Camera | problem occurred. | continues, load camera firmware, |
Firmware’ button and |
| and try again. |
then try the 'Self Test' |
| If you continue to have problems, |
button again.” |
| |
| contact Kodak. | |
|
|
