Kodak EOSDCS 1, EOSDCS 5, EOSDCS 3 user manual Knobs

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.Follow the appropriate part of this step for either a Macintosh or a PC.

MACINTOSH: Attach one 25-pin connector to the SCSI port on the back of the Macintosh computer. Make sure the connector is well seated by pressing it into place firmly, and then tighten both knobs on the cable connector.

Knobs

PC: Attach the 50-pin SCSI2 connector to the SCSI2 port on the back of the PC. Make sure the cable connector is well seated by pressing it into place firmly, so that the spring-clips on the connector snap onto the SCSI port.

 Preparing the Camera and the Computer G 4-15