GE AVN24, AVP24 Install the Case in the Window, Assemble and Attach the Sill and Support Brackets

Page 11

5

Install the Case in the Window

AOpen the window and mark the centerline on the stool.

Mark centerline

C

D

Close the window until it touches behind the top retainer bar.

Secure the case through the case track into the window stool on each side, using two 1″ screws.

Safety Instructions Operating

BCarefully place the case in the window and align the center of the bottom tie bar with the centerline on the window stool. Do not release your grip on the case until the window is in its final position.

Top retainer bar

Bottom tie bar

Secure to stool

Instructions Installation

6

Assemble and Attach the Sill and Support Brackets

Instructions

ALoosely attach the sill brackets to the support brackets with 5/8″ long carriage bolts and nuts.

Support bracket

Carriage bolt

Nut

Sill bracket

BFind the track hole that aligns with the sill bracket on the outer edge of the window sill. Using the 5/8″ long machine screws and nuts attach the support brackets to the case track hole on each side.

CAttach both sill brackets to the window sill using a 1″ long screw on each side.

DTighten the bolts and nuts on both sides.

Level

NOTE: When finished, use a level to make sure the case tilts to the outside 1/4″ minimum. This prevents water from entering the room.

Troubleshooting Tips

Track hole

Sill

11

Customer Service

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Room Air Conditioners Congratulations You Are Now Part of the GE Family GE & You, a Service PartnershipPreparing to Install Service TelephoneSafety Precautions USE of Adapter Plugs -115-Volt models only Read and follow this Safety Information carefullyTemp Controls Mode ControlsAbout the controls on the air conditioner ControlsCare and cleaning of the air conditioner Tools You Will Need Preparing to install the air conditionerBefore You Begin Electrical RequirementsParts Included Window Installation InstructionsStorm Window Requirements Window RequirementsKeep these screws to re-attach the grille later Remove the Air Conditioner from the CaseAttach the Filler Panels to the Case Assemble and Attach the Sill and Support Brackets Install the Case in the WindowInstall the Window Gasket and Replace the Air Conditioner Install the Window Filler Panels and Locking BracketFinish the Wall Opening Through-the-Wall InstallationInstallation Instructions Installation. If the frame is oversized, use shims toSee the Operating Instructions section Before you call for service…Normal Operating Sounds From the date Air Conditioner WarrantyGE Will Replace What GE Will Not CoverService Telephone Numbers

23-11-2129N-002, AVM24, AVM14, AVM15, AVN24 specifications

The GE AVM series represents a line of advanced electronic modules developed by General Electric, designed for a variety of applications in aviation and other sectors requiring robust avionics systems. The AVM18, AVN24, AVM15, and AVM24 models are particularly notable for their integration of cutting-edge technologies, streamlined functionality, and reliability in harsh operating environments.

One of the prominent features of the GE AVM series is their high-level integration, allowing multiple functionalities to be embedded into a single module. The AVM18 model, for instance, is designed to provide superior data processing capabilities, enhancing situational awareness for operators. This model offers features such as advanced signal processing, real-time data analytics, and adaptability to various aircraft types.

The AVN24, on the other hand, focuses on navigation and communication, integrating sophisticated GPS functionality with advanced communication protocols. This ensures that operators receive accurate positioning data alongside seamless communication capabilities. With its enhanced software architecture, the AVN24 can easily be updated to incorporate new features or adapt to changing requirements, demonstrating GE's commitment to future-proofing their technology.

The AVM15 model adds another layer of versatility with its unique ability to interface with a wide range of sensors and systems. This makes it an ideal choice for complex applications where data fusion from multiple sources is essential. Its modular design allows for easy maintenance and upgrades, minimizing downtime and operational disruptions.

The 23-11-2129N-002 model is particularly interesting due to its specific design aimed at meeting stringent safety and regulatory requirements. This model prioritizes redundancy and fault tolerance, ensuring that systems remain operational even in the event of a component failure. The robust architecture of this unit is particularly suited for high-stakes environments where reliability is critical.

Lastly, the AVM24 combines all these features into a compact form factor that is lightweight yet highly durable. This model offers advanced thermal management and resistance to various environmental factors, making it suitable for deployment in diverse conditions. With its impressive power management capabilities, the AVM24 optimizes energy consumption while maintaining peak performance.

In summary, the GE AVM series stands out for its innovative approach to avionics and electronics, showcasing General Electric's dedication to advancing technology in the aviation sector. The integrated systems, modular designs, and advanced features of the AVM18, AVN24, AVM15, 23-11-2129N-002, and AVM24 highlight a commitment to safety, reliability, and efficiency, positioning these modules as leaders in their respective categories.
Top Page Image Contents