Installation
Installation
This spray gun can spray most coatings or fin- ishes currently being used for small compo- nent plastic, wood and metal finishing applications, while easily operating from paint delivery systems, such as pressure pots or remote pumps for production line operation.
The air regulator must have a minimum air flow capacity of 30 scfm at 100 psi (0.7 MPa,
7.0 bar) air pressure.
Ventilate Spray Booth
To prevent hazardous concentrations of toxic and/or flammable vapors, spray only in a prop- erly ventilated spray booth. Do not operate the spray gun unless ventilation fans are operating.
•Check and follow all national, state, and local codes regarding air exhaust velocity requirements.
•Check and follow all local safety and fire codes.
Configure Gun and Manifold
Guns with Manifold
See FIG. 1. The gun is shipped with a fluid plug (25). To use the gun in a circulating system, do not install the plug. In a
1. Connect the fluid supply line to one fluid port fitting and the fluid return line to the other. The manifold fluid ports are reversible.
2. Install the gun on the manifold, using the two screws. Torque the screws evenly to 50
1 Do not install when used in circulating systems.
25
1
TI14429A
FIG. 1: Guns with Manifold
10 | 313869B |
