Technical Data
Technical Data
Maximum working fluid pressure . . . . . . . . . . . . . . . . . . . . 100 psi (0.7 MPa, 7 bar) Maximum working air pressure . . . . . . . . . . . . . . . . . . . . . 100 psi (0.7 MPa, 7 bar) Maximum HVLP Inbound Air Pressure. . . . . . . . . . . . . . . . See chart on page 8.
Maximum Working Fluid Temperature . . . . . . . . . . . . . . . . 120° F (49° C)
Minimum Air Cylinder Actuation Pressure . . . . . . . . . . . . . 50 psi (0.34 MPa, 3.4 bar) Weight
with manifold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3 lb (575 g) with no manifold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.6 lb (275 g)
Wetted Parts
Models
Model 24B866. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PTFE, Stainless Steel, Ultra High
Molecular Weight Polyethylene
Models 24B867 and 24B868. . . . . . . . . . . . . . . . . . . . . PTFE, Stainless Steel, Ultra High Molecular Weight Polyethylene, tungsten carbide
Models 24B861 and 24B874. . . . . . . . . . . . . . . . . . . . . Nylon, PTFE, Stainless Steel, Ultra
High Molecular Weight Polyethylene,
Tungsten Carbide
Models
less Steel, Ultra High Molecular
Weight Polyethylene
Models 24B885 and 24B886. . . . . . . . . . . . . . . . . . . . . Anodized Aluminum, Stainless Steel, Tungsten Carbide, Ultra High Molec- ular Weight Polyethylene
Model 24B884. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Anodized Aluminum, Stainless Steel,
Ultra High Molecular Weight
Polyethylene
Triggering Speed
These values apply to a new gun with a 12 ft. (3.6 m), 1/4 in. (6.3 mm) OD cylinder air line and a 0.043 in. nozzle. These values will vary slightly with use and with variations in equipment.
Cylinder Air |
|
| msec to fully | msec to fully |
Pressure | Fluid Pressure | Air Pressure | ||
psi (kPa, bar) | psi (kPa, bar) | psi (kPa, bar) | open | close |
|
|
|
|
|
50 (0.35, 3.5) | 50 (0.35, 3.5) | 100 (0.7, 7.0) | 48 | 84 |
|
|
|
|
|
32 | 313869B |
