Mounting Hole Layouts | Graco Inc 313869B, TI14427A, TI14428A

Mounting Hole Layouts

Mounting Hole Layouts

Guns with Manifold

0.95 in

(24.1 mm)

1.4 in

(35.6 mm)

0.43 in.			3 x M8 x 1.25
0.43 in.
(10.9 mm)

0.86 in.

(21.8 mm)

ti14441a

1.22 in.

(31.0 mm)

FIG. 22

1.27 in

(32.3 mm)

ti14700a

0.34in. (8.6 mm) thru

0.13in. (3.3 mm) slot

30

313869B

Image 30

Graco Inc 313869B, TI14427A, TI14428A important safety instructions Mounting Hole Layouts

Contents

Important Safety Instructions AirPro EFX Automatic Spray Gun Contents Models Fire and Explosion Hazard Equipment Misuse Hazard Toxic Fluid or Fumes Hazard Selection Charts Gun SelectionProper Needle/Nozzle Selection Models With Manifolds Models Without Manifolds Needle Assembly Identification Air CapsSample Pattern Sizes and Shapes 313869B Configure Gun and Manifold InstallationVentilate Spray Booth Guns with Manifold Ground System Guns without Manifold Mount Gun Reciprocating Arm Rod MountStationary Support Setup Connect Air Line Air regulator Connect Fluid Hose With ManifoldWithout Manifold Position Air Cap Flush Spray Gun Adjust Spray PatternPerform Pressure Relief Procedure, Vertical Pattern Horizontal Pattern Suggested Starting Settings Spray Fan Air Atomizing Air Fluid Pressure Regulator Apply Fluid Pressure Relief ProcedureOperation Incorrect Daily Gun Care General System Maintenance Clean and Flush GunFollow the Pressure Relief Procedure, 313869B Troubleshooting Wrong Problem Cause Solution Service Disassembly Reassembly Parts Guns with ManifoldGuns without Manifold Parts in Common Additional Parts for Models with Manifold Accessories Repair Kits Dimensions Mounting Hole Layouts 44.7 mm M8 x 1.25 T 35 in .9 mm deep 24.1 mm Slot Technical Data Triggering Speed HiTEch Sound DataConventional Air Brush Air Flow Spray Pattern Test Report Spray Pattern Test Report Graco Standard Warranty Graco Information