Safety Instructions, Support | GE ASF24, ASW24, ASW18, ASV24, ASN24

GEAppliances.com

When the air conditioner is turned on, it will automatically start in the setting last used.

Power Outage Recovery Feature

In the case of a power outage or interruption, the	SLEEP features will reset to the original setting. You
unit will automatically re-start in the settings last	may need to set a new time if desired.
used after the power is restored. The TIMER and

Safety Instructions

COOL Mode

Use the COOL mode with HIGH (3), MED (2) or LOW (1) fan for cooling. Use the INCREASE ▲ / DECREASE ▼ pads to set the desired temperature between 64°F and 86°F in 1°F increments.

A thermostat is used to maintain the room temperature. The compressor will cycle on and off to keep the room at the set level of comfort. Set the thermostat at a lower number and the indoor air will become cooler. Set the thermostat at a higher number and the indoor air will become warmer.

NOTE: If the air conditioner is off and is then turned on while set to COOL, it will take approximately 3 minutes for the compressor to start and cooling to begin.

Cooling Descriptions

For Normal Cooling—Select the COOL mode and HIGH (3) or MED (2) fan with a middle set temperature.

For Maximum Cooling—Select the COOL mode and HIGH (3) fan with a lower set temperature.

For Quieter & Nighttime Cooling—Select the COOL mode and LOW (1) fan with a middle set temperature.

NOTE: If you switch from a COOL setting to OFF or to a fan setting, wait at least 3 minutes before switching back to a COOL setting.

Operating Instructions Installation

FAN Mode

Use the FAN at HIGH (3), MED (2) or LOW (1) to	Since fan only settings do not provide cooling, a
provide air circulation and filtering without cooling.	temperature setting will not be displayed.
Vent Control (on some models)
The vent control is located on the inside of the
air louvers in the lower right corner.
When set at CLOSE, only the air inside the room
will be circulated and conditioned. When set at
OPEN, some inside air is exhausted outside.
	To open the vent, push the lever to the right.
	To close it, push it to the left.
Air Direction—Up and Down (on some models)
Fingertip pressure on the horizontal louvers adjusts
the air direction up or down.
	OR

Air Direction—Side-to-Side (on some models)

On some models, the side-to-side air direction is adjusted by the louver levers or by grasping and

Instructions Troubleshooting Tips Consumer

moving the inner vertical louvers.

Support

ASQ24, ASL24, ASF24, ASM24, ASN24 specifications

General Electric (GE) has made a significant impact in the industrial automation market with its range of programmable logic controllers (PLCs) tailored for various applications. Among these models, the ASQ24, ASN24, ASL24, ASV24, and ASW24 stand out for their unique features, technologies, and characteristics that cater to diverse operational needs.

The ASQ24 model is known for its versatility in handling complex automation tasks. This PLC integrates advanced communication capabilities, allowing seamless connectivity with other devices in an industrial network. It features robust processing power and enhanced memory capacity, enabling it to execute sophisticated algorithms and manage extensive I/O operations efficiently.

Moving to the ASN24, this model is specifically designed for applications requiring high-speed data processing and real-time control. Equipped with specialized functions to manage motion control and automation seamlessly, the ASN24 excels in environments with stringent timing requirements. Its compatibility with various communication protocols ensures it can interface easily with existing systems, enhancing interoperability within manufacturing operations.

The ASL24 model focuses on safety and reliability. Complying with international safety standards, the ASL24 comes equipped with built-in safety features designed to mitigate risks in industrial operations. This model also allows for easy diagnostics and system monitoring, making maintenance straightforward. This PLC is ideal for applications where equipment safety and operational integrity are paramount.

The ASV24 enhances visualization and user interaction with robotic applications. It incorporates advanced human-machine interface (HMI) technology, allowing operators to monitor and control processes intuitively. The ASV24 is designed to facilitate data visualization and analytics, providing insights into operational efficiency and performance metrics.

Lastly, the ASW24 is tailored for wireless applications, making it suitable for operations in remote or mobile environments. This model supports wireless communication networks, permitting real-time monitoring and control without traditional cabling constraints. The ASW24 is perfect for scenarios where flexibility and ease of deployment are prioritized.

In summary, the GE ASQ24, ASN24, ASL24, ASV24, and ASW24 PLCs represent a comprehensive suite of automation solutions. With their unique features, such as enhanced safety, high-speed processing, intuitive visualization, and wireless capabilities, these models cater to the diverse needs of modern industrial operations, making them essential tools for optimizing productivity and efficiency across various sectors.