Support Troubleshooting Tips, Remote Control

Operating Instructions Safety Instructions

About the controls on the air conditioner—models with touch pads.

Features and appearance will vary.

COOL On

FAN On

	ENERGY	TIMER On
	SAVER On	TIMER On
	SAVER On
	SLEEP On

Air Conditioner Controls

Remote Control

Installation Instructions

ON/OFF

Turns air conditioner on and off.

Display

MODE

Use to set the air conditioner to COOL or FAN mode.

Increase ▲ /Decrease ▼ Pads

Use to set temperature when in COOL mode.

FAN

Use to set the fan speed at LOW, MED or HIGH.

TIMER

ON—When the air conditioner is off, it can be set to automatically turn on in 1 to 12 hours or 1 to 24 hours (depending on model) at its previous setting. Each touch will set the time in hours.

OFF—When the air conditioner is on, it can be set to automatically turn off in 1 to 12 hours or 1 to 24 hours (depending on model). Each touch will set the time in hours.

To cancel the timer, press the TIMER pad until the display time disappears.

Support Troubleshooting Tips

AUTO CIRCULAIRE

Turn on to provide continuous side-to-side air circulation.

For fixed side-to-side air direction, turn ON until the desired air direction is obtained, then turn it OFF.

ENERGY SAVER–Controls the fan.

ON—The fan and compressor cycle on and off. This results in wider variations of room temperature and humidity. Normally used when the room is unoccupied. Note: The fan will continue to run for a short time after the compressor cycles off.

OFF—The fan runs all the time, while the compressor cycles on and off.

This switch must be set at OFF in order to use the fan settings (on the mode control).

SLEEP

Press to set the air conditioner to run for 8 hours before it automatically shuts off.

When the SLEEP pad is pressed, SLEEP displays for approximately 15 seconds, then shows the time remaining.

One hour after the sleep timer is set, the set temperature will automatically increase 2°F.

To cancel the sleep mode, press the SLEEP pad a second time.

Note: The sleep timer will be cancelled if the TIMER, ENERGY SAVER or MODE pad is pressed.

Remote Control Signal Receiver

Consumer

Remote Control

■To ensure proper operation, aim the remote control at the signal receiver on the air conditioner.

4■ The remote control signal has a range of up to 21 feet.

■Make sure nothing is between the air conditioner and the remote control that could block the signal.

■Make sure batteries are fresh and installed correctly—see the Care and Cleaning section.

ASQ24, ASL24, ASF24, ASM24, ASN24 specifications

General Electric (GE) has made a significant impact in the industrial automation market with its range of programmable logic controllers (PLCs) tailored for various applications. Among these models, the ASQ24, ASN24, ASL24, ASV24, and ASW24 stand out for their unique features, technologies, and characteristics that cater to diverse operational needs.

The ASQ24 model is known for its versatility in handling complex automation tasks. This PLC integrates advanced communication capabilities, allowing seamless connectivity with other devices in an industrial network. It features robust processing power and enhanced memory capacity, enabling it to execute sophisticated algorithms and manage extensive I/O operations efficiently.

Moving to the ASN24, this model is specifically designed for applications requiring high-speed data processing and real-time control. Equipped with specialized functions to manage motion control and automation seamlessly, the ASN24 excels in environments with stringent timing requirements. Its compatibility with various communication protocols ensures it can interface easily with existing systems, enhancing interoperability within manufacturing operations.

The ASL24 model focuses on safety and reliability. Complying with international safety standards, the ASL24 comes equipped with built-in safety features designed to mitigate risks in industrial operations. This model also allows for easy diagnostics and system monitoring, making maintenance straightforward. This PLC is ideal for applications where equipment safety and operational integrity are paramount.

The ASV24 enhances visualization and user interaction with robotic applications. It incorporates advanced human-machine interface (HMI) technology, allowing operators to monitor and control processes intuitively. The ASV24 is designed to facilitate data visualization and analytics, providing insights into operational efficiency and performance metrics.

Lastly, the ASW24 is tailored for wireless applications, making it suitable for operations in remote or mobile environments. This model supports wireless communication networks, permitting real-time monitoring and control without traditional cabling constraints. The ASW24 is perfect for scenarios where flexibility and ease of deployment are prioritized.

In summary, the GE ASQ24, ASN24, ASL24, ASV24, and ASW24 PLCs represent a comprehensive suite of automation solutions. With their unique features, such as enhanced safety, high-speed processing, intuitive visualization, and wireless capabilities, these models cater to the diverse needs of modern industrial operations, making them essential tools for optimizing productivity and efficiency across various sectors.