Support Troubleshooting Tips Installation Instructions

Operating Instructions Safety Instructions

About the controls on the air conditioner–models with touch pads.

Features and appearance will vary.

Low	Med	High	CIRCULAIRE	ENERGY
Fan	Fan	Fan	On	SAVER On
Fan	Fan	Fan	On	SAVER On
On	On	On

Cool

Mode On

Fan				Timer
Only				On
Only				On
On
On

Air Conditioner Controls

Remote Control

Support Troubleshooting Tips Installation Instructions

ON/OFF

Turns air conditioner on and off.

Display

MODE

Use to set the air conditioner to COOL or FAN.

Increase ▲ /Decrease ▼ Pads

Use to set temperature when in COOL mode.

FAN

Use to set the fan speed at LOW, MED or HIGH.

CIRCULAIRE

Turn on to provide continuous side-to-side air circulation.

For fixed side-to-side air direction, turn ON until the desired air direction is obtained, then turn it OFF.

ENERGY SAVER–Controls the fan.

ON–The fan and compressor cycle on and off. This results in wider variations of room temperature and humidity. Normally used when the room is unoccupied. Note: The fan will continue to run for a short time after the compressor cycles off.

OFF–The fan runs all the time, while the compressor cycles on and off.

This switch must be set at OFF in order to use the fan settings (on the mode control).

TIMER

ON–When the air conditioner is off, it can be set to automatically come on in 1 to 24 hours at its previous setting. Each touch will set the time in hours.

OFF–When the air conditioner is on, it can be set to automatically turn off in 1 to 24 hours. Each touch will set the time in hours.

To cancel the timer, press the TIMER pad until the display time disappears.

SLEEP

Press to set the air conditioner to run for 8 hours before it automatically shuts off.

When the SLEEP pad is pressed, SLEEP scrolls across the display for approximately 15 seconds, then shows the time remaining.

One hour after the sleep timer is set, the set temperature will automatically increase 1°F.

To cancel the sleep mode, press the SLEEP pad a second time.

Note: The sleep timer will be cancelled if the TIMER, ENERGY SAVER or MODE pad is pressed.

Remote Control Signal Receiver

Consumer

Remote Control

■To ensure proper operation, aim the remote control at the signal receiver on the air conditioner.

■The remote control signal has a range of

4up to 21 feet.

■Make sure nothing is between the air conditioner and the remote control that could block the signal.

■Make sure batteries are fresh and installed correctly–see the Care and Cleaning section.

ASM08, ASD06, ASM10 specifications

The GE ASM10, ASD06, and ASM08 are notable members of General Electric's industrial automation and control lineup, specifically designed for advanced motion control and process automation applications. Each of these models offers unique features and technologies that cater to different operational needs while maintaining the high reliability and performance expected from GE products.

The GE ASM10 is recognized for its robust architecture and flexibility in various industrial environments. It supports a wide range of communication protocols including Ethernet, PROFINET, and Modbus, allowing for seamless integration into existing systems. With its streamlined design, the ASM10 maximizes space utilization and simplifies installation, making it an ideal choice for machinery manufacturers and system integrators. This series excels in providing high precision positioning capabilities, making it suitable for CNC machines, robotics, and other applications requiring fine motion control. Advanced safety features, such as Safe Torque Off (STO) and Safe Stop 1 (SS1), enhance operational safety, protecting both equipment and personnel.

The GE ASD06 offers a scalable solution targeted primarily at automation tasks. It integrates sophisticated algorithms for motor control, which result in energy-efficient operations while maintaining optimal performance. The ASD06’s user-friendly interface allows for easy configuration and monitoring, enhancing productivity for machine operators. Additionally, it features built-in diagnostics that provide real-time feedback on system performance, allowing for preemptive maintenance. This model supports various motor types including synchronous and asynchronous motors, making it versatile across different industries. Its compact design requires minimal mounting space, which is particularly beneficial for retrofitting existing machinery.

Finally, the GE ASM08 is designed for applications that require high-speed and high-accuracy performance. The controller employs cutting-edge motion control technologies that facilitate precise synchronization of multiple axes. Its ability to handle complex applications, such as multi-axis robotics and intricate conveyor systems, sets it apart as a leader in advanced automation. The ASM08 is equipped with powerful processing capabilities, supporting real-time data analysis and decision-making. Its modular design enables easy expansion of system capabilities, ensuring that organizations can adapt to changing production demands.

In summary, GE's ASM10, ASD06, and ASM08 series provide diverse, high-performance solutions that enhance operational efficiency across various sectors. Each model combines innovative technologies with user-friendly features, enabling industries to achieve greater productivity and safety in their automation processes.