Safety Instructions Operating

Install the Case in the Window

5		Open the window and mark the centerline of
	A	Open the window and mark the centerline of
	A	the window stool.
		the window stool.
		Carefully place the case on the window stool
	B	Carefully place the case on the window stool
		and align the center mark on the bottom front
		and align the center mark on the bottom front
		with the centerline of the stool.
		Pull the window down behind the top
	C	Pull the window down behind the top
		mounting rail.
		mounting rail.

FAdjust the bolt and the nut in each support so that the case is installed with a slight downward tilt (about 1/8″).

GSecure the case to the window stool by using 3 type B screws.

NOTE: Do not shut the window so tightly that movement of the accordion panels is restricted.

DLoosely assemble the sill supports.

INDOOR	OUTDOOR
	Sill support
Bolt	Nut

ESelect the position that will place the sill supports near the outermost point on the sill. Attach the sill supports to the case track hole in relation to the selected position using 2 type A screws in each support.

Frame guide

Sill support

HPull the accordion panels to each window sash track. Attach them on each side to the window sash and the window stool using 4 type C screws.

Instructions Installation Instructions Troubleshooting Tips

Customer Service