Install the Air Conditioner in the Case

OperatingInstructions SafetyInstructions

Window Installation Instructions

Install the Window Locking Bracket and the Foam Top Window Gasket

6		Attach the window locking bracket with a		Cut the foam top window gasket to the window
	A	Attach the window locking bracket with a	B	Cut the foam top window gasket to the window
	A	type C screw.	B	width.
		type C screw.		width.
				Stuff the foam between the glass and the
			C	Stuff the foam between the glass and the
				window to prevent air and insects from getting
				window to prevent air and insects from getting
				into the room.

TroubleshootingTips Installation Instructions

7		Slide the air conditioner into the case.
	A	Slide the air conditioner into the case.
	A	Reinstall the 2 screws removed earlier on each
		Reinstall the 2 screws removed earlier on each
		side of the case.
		Before installing the front grille, pull out the
	B	Before installing the front grille, pull out the
		vent control lever located above the unit
		vent control lever located above the unit
		control knobs, as shown.

Attach the front grille to the case by inserting the tabs on the grille into the slots on the front of the case. Push the grille in until it snaps into place.

CustomerService

	Guide the lever carefully
	through the grille as you
	push it in.
D	Lift the inlet grille and secure it with a type A
	screw through the front grille.