Safety Precautions

Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock or personal injury.

Instructions Operating Instructions

■Use this appliance only for its intended purpose as described in this Owner’s Manual.

■This air conditioner must be properly installed in accordance with the Installation Instructions before it is used.

■Never unplug your air conditioner by pulling on the power cord. Always grip plug firmly and pull straight out from the receptacle.

■Replace immediately all electric service cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.

■Turn the mode control OFF and unplug your air conditioner before cleaning.

■GE does not support any servicing of the air conditioner. We strongly recommend that you do not attempt to service the air conditioner yourself.

■For your safety…do not store or use combustible materials, gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

■All air conditioners contain refrigerants, which under federal law must be removed prior to product disposal. If you are getting rid of an old product with refrigerants, check with the company handling disposal about what to do.

HOW TO CONNECT ELECTRICITY

Consumer Support Troubleshooting Tips Installation

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a 2-prong wall outlet is encountered,

it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The air conditioner should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

See the Installation Instructions, Electrical Requirements section for specific electrical connection requirements.

ASR05 specifications

The GE ASR05 is a cutting-edge aviation surveillance radar system developed by General Electric, designed specifically to enhance air traffic management and ensure safer skies for both commercial and private aircraft. This state-of-the-art system exemplifies the marriage of advanced technology and user-centered design, providing critical data and situational awareness to air traffic controllers.

One of the standout features of the ASR05 is its advanced signal processing capabilities. Using sophisticated algorithms, the radar system can filter out noise and clutter, ensuring accurate detection of aircraft, even in challenging environments such as adverse weather conditions or high-density airspace. This ability significantly improves the reliability and precision of tracking individual aircraft, enhancing safety and efficiency.

The ASR05 employs a solid-state radar architecture, which offers numerous advantages over traditional radar systems. Solid-state technology allows for increased operational reliability and reduced maintenance needs, resulting in lower life-cycle costs for operators. Furthermore, this technology provides a broader operational range, allowing air traffic controllers to monitor aircraft at greater distances and in diverse flight patterns without loss of accuracy.

Another key characteristic of the GE ASR05 is its compatibility with Automatic Dependent Surveillance–Broadcast (ADS-B) technology. This integration ensures that the system can receive real-time data from equipped aircraft, improving situational awareness and enabling better decision-making. By utilizing ADS-B, the ASR05 can track aircraft trajectory and provide information such as altitude and speed, further enhancing the air traffic management process.

Additionally, the ASR05 is designed with a modular architecture, allowing for easy upgrades and expansions as technology evolves. This flexibility enables airports and air traffic management agencies to adapt to emerging requirements without relying on a complete system overhaul, safeguarding their investment over time.

GE has also prioritized user interface design in the ASR05, ensuring that air traffic controllers have access to intuitive and user-friendly tools for monitoring and managing air traffic. The advanced visualization features of the system provide clear graphical representations of air traffic, enabling controllers to make informed decisions quickly and efficiently.

In summary, the GE ASR05 is a remarkable advancement in aviation surveillance technology, boasting features like advanced signal processing, solid-state radar architecture, ADS-B compatibility, and a modular design. Its commitment to safety, reliability, and user experience positions it as a key asset in the ongoing evolution of air traffic management, ensuring that air travel remains safe and efficient for all.