GE ASR05 Safety, Cool Mode, FAN Mode, Air Direction-Up and Down on some models

Page 5

 

GEAppliances.com

When the air conditioner is turned on, it will

Lights beside the touch pads on the air conditioner

automatically start in the setting last used.

control panel indicate the selected settings.

Safety

COOL Mode

Use the COOL mode with HIGH (F3), MED (F2) or LOW (F1) fan for cooling. Use the INCREASE / DECREASE pads to set the desired temperature between 64°F and 86°F in 1°F increments.

A thermostat is used to maintain the room temperature. The compressor will cycle on and off to keep the room at the set level of comfort. Set the thermostat at a lower number and the indoor air will become cooler. Set the thermostat at a higher number and the indoor air will become warmer.

NOTE: If the air conditioner is off and is then turned on while set to COOL, it will take approximately 3 minutes for the compressor to start and cooling to begin.

Cooling Descriptions

For Normal Cooling–Select the COOL mode and HIGH (F3) or MED (F2) fan with a middle set temperature.

For Maximum Cooling–Select the COOL mode and HIGH (F3) fan with a lower set temperature.

For Quieter & Nighttime Cooling–Select the COOL mode and LOW (F1) fan with a middle set temperature.

NOTE: If you switch from a COOL setting to OFF or to a fan setting, wait at least 3 minutes before switching back to a COOL setting.

Instructions Operating Instructions

FAN Mode

Use the FAN at HIGH (F3), MED (F2) or LOW (F1) to provide air circulation and filtering without cooling. Since fan only settings do not provide cooling, a temperature setting will not be displayed.

Vent Control (on some models)

The vent control is located on the inside of the air louvers in the lower right corner.

When set at CLOSE, only the air inside the room will be circulated and conditioned. When set at OPEN, some inside air is exhausted outside.

To open the vent, push the lever to the right.

To close it, push it to the left.

Air Direction—Up and Down (on some models)

Fingertip pressure on the horizontal louvers adjusts the air direction up or down.

OR

Air Direction—Side-to-Side (on some models)

 

On some models, the side-to-side air direction is

 

adjusted by the louver levers or by grasping and

 

moving the inner vertical louvers.

OR

5

Installation Instructions Troubleshooting Tips Consumer Support

Image 5
Contents Write the model and serial numbers here Model # Serial # 49-7463 01-03 JRSafety Precautions GEAppliances.com Installation InstructionsOperating Remote Control Tips Installation InstructionsCool Mode SafetyFAN Mode Air Direction-Up and Down on some modelsInstructions Mode ControlsConsumer Support Temp ControlsAdditional controls and important information Air Direction-Side-to-SideHow to Insert the Batteries Care and cleaning of the air conditionerGrille and Case Outdoor CoilsTo replace the grille Front Grille and CaseTo remove the front grille Read these instructions completely and carefully Preparing to install the air conditionerParts Included Window Installation InstructionsStorm Window Requirements Operating Instructions SafetyWindow Requirements Prepare the Air Conditioner Safety Instructions OperatingConsumer Support Troubleshooting Tips Installation Safety InstructionsInstall the Air Conditioner in the Window Install the Security Bracket and the Foam Top Window GasketTroubleshooting Tips Consumer Support Normal Operating Sounds Troubleshooting Tips…Order to Make a Warranty Claim GE Air Conditioner Warranty-One Year Limited WarrantyWhat Is Not Covered We Will ReplaceConsumer Support GE Appliances Website Parts and AccessoriesReal Life Design Studio Contact UsAcondicionadores de Aire Operación Instalación ¡ADVERTENCIAPrecaución Seguridad Servicio al consumidor Solucionar problemasControl remoto LOW F1 BAJO, MED F2 o High F3 AltoModo Cool Frio SolucionarModo de FAN Ventilador Dirección del aire-de lado a lado en algunos modelosServicio al consumidor Instalación Solucionar problemasControles de modo Descripciones de enfriamientoDirección del aire-de lado a lado Control de ventilación en algunos modelosCuidado y limpieza del acondicionador de aire Instalación Servicio al consumidor Solucionar problemasPara reemplazar la parrilla Parrilla frontal y cajaPara retirar la parrilla frontal Lea estas instrucciones completa y cuidadosamente Preparándose para instalar el acondicionador de aireOperación Partes incluidas Instrucciones para la instalación en una ventanaRequisitos para la ventana Seguridad OperaciónPrepare el acondicionador de aire Instale el acondicionador de aire en la ventana Seguridad Operación Instalación Solucionar problemasSonidos de operación normales Un año Nosotros reemplazaremosLo que no está cubierto Póngase en contacto con nosotros Ayuda al Cliente Página Web de GE AppliancesPiezas y accesorios

ASR05 specifications

The GE ASR05 is a cutting-edge aviation surveillance radar system developed by General Electric, designed specifically to enhance air traffic management and ensure safer skies for both commercial and private aircraft. This state-of-the-art system exemplifies the marriage of advanced technology and user-centered design, providing critical data and situational awareness to air traffic controllers.

One of the standout features of the ASR05 is its advanced signal processing capabilities. Using sophisticated algorithms, the radar system can filter out noise and clutter, ensuring accurate detection of aircraft, even in challenging environments such as adverse weather conditions or high-density airspace. This ability significantly improves the reliability and precision of tracking individual aircraft, enhancing safety and efficiency.

The ASR05 employs a solid-state radar architecture, which offers numerous advantages over traditional radar systems. Solid-state technology allows for increased operational reliability and reduced maintenance needs, resulting in lower life-cycle costs for operators. Furthermore, this technology provides a broader operational range, allowing air traffic controllers to monitor aircraft at greater distances and in diverse flight patterns without loss of accuracy.

Another key characteristic of the GE ASR05 is its compatibility with Automatic Dependent Surveillance–Broadcast (ADS-B) technology. This integration ensures that the system can receive real-time data from equipped aircraft, improving situational awareness and enabling better decision-making. By utilizing ADS-B, the ASR05 can track aircraft trajectory and provide information such as altitude and speed, further enhancing the air traffic management process.

Additionally, the ASR05 is designed with a modular architecture, allowing for easy upgrades and expansions as technology evolves. This flexibility enables airports and air traffic management agencies to adapt to emerging requirements without relying on a complete system overhaul, safeguarding their investment over time.

GE has also prioritized user interface design in the ASR05, ensuring that air traffic controllers have access to intuitive and user-friendly tools for monitoring and managing air traffic. The advanced visualization features of the system provide clear graphical representations of air traffic, enabling controllers to make informed decisions quickly and efficiently.

In summary, the GE ASR05 is a remarkable advancement in aviation surveillance technology, boasting features like advanced signal processing, solid-state radar architecture, ADS-B compatibility, and a modular design. Its commitment to safety, reliability, and user experience positions it as a key asset in the ongoing evolution of air traffic management, ensuring that air travel remains safe and efficient for all.