Make sure that your headset is fully charged for two hours before you start using it.. Use the AC power supply to charge from a power socket.. When the light indicator (LED) has a solid LED light, your headset is charging. When the solid LED light turns off, it is fully charged..
Use only the charger provided in the box - do not user chargers from any other devices as this may damage your headset..
Please note: The lifetime of the battery will be significantly reduced if your device is left uncharged for a long period.. We therefore recommend that you recharge your device at least once a month..
Turning your headset on and off
•Press on/off button for approx. 2 seconds to turn the headset on or off.
Pairing it with your phone
Headsets are connected to phones using a procedure called ‘pairing’.. By following a few simple steps, a phone can be paired with a headset in a matter of minutes..
1. Put the headset in pairing mode
•When you turn on your Jabra BT2070 for the first time, the headset will automatically start up in pairing mode – i.e. it is discoverable for your phone.. When the headset is in pairing mode the LED is constantly lit..
2. Set your Bluetooth phone to ‘discover’ the Jabra BT2070
•Follow your phone’s instruction guide. First make sure that
Bluetooth is activated on your mobile phone.. Then set your phone to discover the headset.. This usually involves going to a ‘setup,’‘connect’ or ‘Bluetooth’ menu on your phone and selecting the option to ‘discover’ or ‘add’ a Bluetooth device.*
english
Jabra bt2070 | 5 |