Make a call
•When you make a call from your mobile phone, the call will
(subject to phone settings) automatically transfer to your headset.. If your phone does not allow this feature, tap on the
Jabra BT2070’s answer/end button to transfer the call to the headset..
Reject a call *
•Press the answer/end button when the phone rings to reject an incoming call.. Depending on your phone settings, the person who called you will either be forwarded to your voice mail or you will hear a busy signal..
Activate voice dialing*
•Press the answer/end button. For best results, record the voice- dialling tag through your headset.. Please consult your phone’s user manual for more information about using this feature..
Redial last number *
•Double Tap the answer/end button when the headset is on and not used..
Adjust sound and volume *
• Tap the volume up or down to adjust the volume.
Mute/unmute
•To mute, press both volume up and down at the same time.
A low beep alert plays during a muted call..
•To
Call waiting and placing a call on hold*
This lets you put a call on hold during a conversation and answer a waiting call..
•Press the answer/end button once to put the active call on hold and answer the waiting call..
•Press the answer/end button to switch between the two calls.
•Tap the answer/end button to end the active conversation.
english
* Phone dependent | Jabra bt2070 | 7 |