Paxar 612, 611, 610 user manual Using the Knife, Adjusting the Drop Tray

Using the Knife

The installed knife is two and a half (2-1/2) inches away from the printhead. Pressing and holding Feed for two seconds marks the tag under the printhead to be cut when it reaches the knife. Depending on the length of your supply, you may lose up to two tags after the last batch.

________

The knife operates when the printer is running. If the Printer is paused, the knife stops cutting.

Adjusting the Drop Tray

Depending on the model purchased, your printer may have a drop tray stacker. Adjust the drop tray by removing the plastic pins and re-inserting them according to the diagram below. Select the setting based on the length of your label.

Users Manual - 610/611/612 Printers Printing ∙ 31