Resend the format so these changes take effect. Change the settings after the batch is done printing.
Review the following definitions for the different print position adjustments.
Supply Position | Adjusts the machine to print at the vertical 0,0 point on |
| the supply. Increase the supply position to move print |
| up, decrease to move print down on the label. The |
| range is |
The supply position adjustment should only be made on initial printer setup. For format adjustments, change the print position.
Print Position | Adjusts where data prints vertically on the supply. |
| Increase the print position to move print up, decrease |
| to move print down. The range is |
Margin Position | Adjusts where data prints horizontally on the supply. |
| Increase the margin position to move print to the right, |
| decrease to move print to the left. The range is |
| 99 dots. |
Adjusting the Cut Angle
To adjust the cut angle:
1.Loosen the thumbscrews.
2.Slightly rotate the knife to the left or to the right. The knife may appear to sit at a slight angle to the printer.
3.Tighten the thumbscrews.
Cut another batch of tags. If you are unable to adjust for a straight cut, call Technical Support.
30 ∙ Printing | Users Manual - 610/611/612 Printers |
