Paxar 611, 610, 612 user manual Audience, Unpacking the Printer, Connecting the Power Cable

Audience

The Operator's Handbook is for the person who prints and applies labels.

Unpacking the Printer

After you unpack the printer, you should have: a 610 / 611 / 612 printer, power cord, communication cable and a ribbon take-up core (may already be on take-up reel).

Keep the box and packaging material in case the printer ever needs repair.

Power cords are not supplied with 230-volt printers. You need to purchase a power cord separately. The power cord requires IEC 320 STD C13 end finish for the printer interface and it must meet requirements for 1.6 Amps at 115VAC and 1 Amp at 230VAC.

Connecting the Power Cable

To connect the power cable:

1.Plug the power cable into the socket. Plug the other end of the cable into a grounded electrical outlet.

2.Turn on the printer. Press ( I ) to turn on and ( O ) to turn off the printer.

Power Cable goes here

For information about replacing the fuse, see Chapter 4, "Care and Maintenance."

2 ∙ Getting Started Users Manual - 610/611/612 Printers