6.Push down on the supply lever to unlock the supply guides.
7.Lay the label strip across the supply guide. Lift the auxiliary rollers slightly and thread the supply under the rollers until it appears in the knife opening.
Peel Bar
Ribbon Bar
CAUTION
Make sure the supply is straight in the supply path and
aligned with the printhead.
8. Tuck the supply under the nibs.
Nibs
Supply Lever
__________
Make sure a few inches of supply are past the front end of the printer.
__________
12 ∙ Loading Supplies | Users Manual - 610/611/612 Printers |
