Function Controller
The function controller is an additional controller which is used with the centralized controller. To use the function controller, refer to an appropriate manual.
Operating mode
Removing frost indicator |
|
| Centralized controller indicator |
|
Communication error indicator | Temperature setting | |
| ||
Room number display | Fan speed | |
| ||
| Air flow direction | |
Test indicator | Filter Sign indicator | |
| On/Off & Timer | |
Temperature adjustment | Set/Cancel button | |
On/Off indicator | ||
buttons | ||
| ||
| Fan speed adjustment | |
Indoor unit selection button | button | |
| Swing button | |
Test button | Filter Reset button |
Mode selection button
Note ◆ Test button is for your installation specialist. You must NOT press it.
◆After cleaning the air filter, press the filter reset button. Then the wired remote controller will display the FILTER SIGN indicator when the time to clean the air filter.
ENGLISH