Samsung SC8551, DJ68-00330A 7CHANGE the Batteryoptional, Motor does not start No power supply

Page 11

7CHANGE THE BATTERY(OPTIONAL)

BATTERY TYPE : AA Size

NOTE

1.When the vacuum cleaner does not work, replace the batteries. If the problem persists, please contact our authorized dealer.

2.Use 2 batteries of size AA.

WARNING 1. Never disassemble or recharge the batteries.

2.Never heat up the batteries or throw them into fire.

3.Do not reverse (+),(-) poles.

4.Dispose of the batteries properly.

-IF YOU HAVE A PROBLEM

PROBLEM

CAUSE

REMEDY 0

Motor does not start.

No power supply.

Check cable, plug and socket.

 

Thermal cut-out.

Leave to cool.

 

 

 

Suction force is gradually

Nozzle, suction hose or tube

Check for blockage and

decreasing.

is blocked.

remove it.

Cord does not rewind fully.

Check that the cord is not

Pull the cord out 2-3m and

 

twisted or wound unevenly.

push the cord rewind button.

 

 

 

Vacuum cleaner does not

Crack or hole in hose.

Check hose and replace if

pick up dirt.

 

required.

 

 

 

Low or decreasing suction

Filter is full of dust.

Please check filter and, if

 

 

necessary, clean as illustrat-

 

 

ed in the instructions.

 

 

 

This Vacuum cleaner is approved the following.

EMC Directive : 89/336/EEC, 92/31/EEC and 93/68/EEC

Low Voltage Safety Directive : 73/23/EEC and 93/68/EEC

If you have any comments or questions regarding a Samsung products, contact the SAMSUNG customer care center.

Country

Customer Care Center

Web Site

U.K

0870 242 0303

www.samsung.com/uk

SOUTH AFRICA

0860 7267864 (SAMSUNG)

www.samsung.com/za

If you have any comments or questions regarding a Samsung products, contact the SAMSUNG customer care center.

Country

Customer Care Center

Web Site

AUSTRALIA

1300 362 603

www.samsung.com/au

HONG KONG

2862 6001

www.samsung.com/hk

MALAYSIA

1800-88-9999

www.samsung.com/my

SINGAPORE

1800-SAMSUNG (7267864)

www.samsung.com/sg

10

Image 11
Contents Vacuum Cleaner Important Safeguards 1ASSEMBLING the Cleaner Power Control Infrared Control 2OPERATING the CleanerPower Cord Pipe HOW to USE and Maintain the AccessoriesVacuum dust in wide area at once Bin 3EMPTYING the Dust BINPressing the button Bin cover Throw away dustTurn the vacuum power to MAX 4CLEANING the Dust PackWhen to Clean the Dust Pack Shade for more than Dust pack Hours Cleaning the Dust PackRemove the dust bin and dust Remove the fixed frame Pack as shown Dust pack cover6CLEANING the Outlet Filter 5CLEANING the Motor Protection FilterCheck for blockage 7CHANGE the BatteryoptionalMotor does not start No power supply Thermal cut-out Leave to cool Suction force is graduallyDJ68-00330A REV0.2