2OPERATING THE CLEANER
2-1 POWER CORD
Please make sure your cable is fully extended before use.
NOTE
When removing the plug from the electrical outlet, grasp the plug, not the cord.
2-2 POWER CONTROL (INFRARED CONTROL)
- HOSE
SENDER
HANDLE CONTROL
[The cleaner is controlled by using
infrared signals.]
- BODY
1. Vacuum cleaner ON/OFF
Press the ON/OFF button to operate the vacuum cleaner. Press again to stop the vacuum cleaner.
2. Vacuum cleaner MODE
Press the MODE button repeatedly to select the correct mode.
(ON) MIN → MID → MAX
3. Using Auto mode
Press the Auto button to operate the vacuum cleaner automatically.
Press the power control button repeatedly to select the correct mode.
(ON(MAX) → OFF)
NOTE : If the remote handle control is not working, the cleaner can be operated using the control button on the body of the machine.
The filter light is illuminated when the dust pack requires checking or emptying.
An audio signal will also sound.
The IR light indicates the part that receives the
This shows the generation of negative ions when the vacuum cleaner is in operation.
This indicates that the automatic suction mode is selected.
The level of suction is indicated by the LED display.
3