GE BFLH70L, BFLH85L manual Troubleshooting Guide, Use and Care

Page 5

4.Attach light reflector in place with the two screws removed during Step 2 in SECTION 1 Preparing the Unit so grill fits snuggly against ceiling (Figure 14).

Screws

Figure 14

CAUTION: FAILURE TO SECURE THE REFLECTOR SCREWS MAY RESULT IN A RATTLING OR HUMMING NOISE.

5.Install a 100 watt maximum, type A19 medium base incandescent bulb (not included).

6.Close the light lens and secure in place by swinging back into position and snapping the tabs in place (Figure 15).

Connector Bar

Tabs

Figure 15

7. Restore power and test your installation.

SECTION 7

Use and Care

CAUTION: MAKE SURE POWER IS SWITCHED OFF AT SERVICE PANEL BEFORE SERVICING THE UNIT.

1.Cleaning the Grill: Reverse the instructions in Section 6 Completing the Installation to remove grill. Use a mild detergent, such as dishwashing liquid, and dry with a soft cloth. NEVER USE ANY ABRASIVE PADS OR SCOURING POWDERS. Completely dry grill before reinstalling. Refer to instructions in Section 6 Completing the Installation, to reinstall grill.

2.Cleaning the Fan Assembly: Wipe all parts with a dry cloth or gently vacuum the fan. NEVER IMMERSE ELECTRICAL PARTS IN WATER.

CAUTION: ALLOW BULBS TO COOL BEFORE REPLACING.

3.Changing the Light Bulb: Disconnect power to the unit. Open light lens by pushing in on the two tabs of light lens and pulling outward from lens. The lens will swing open on the connector bars. DO NOT remove the lens from the grill (Figure 16).

Connector Bar

Tabs

Figure 16

4.Unscrew bulb from lamp holder and replace with a 100 watt maximum, type A19 medium base incandescent bulb.

Troubleshooting Guide

 

Trouble

 

Probable Cause

 

Suggested Remedy

1.

Fan does not operate when the switch is on.

1a.

A fuse may be blown or a circuit tripped.

1a.

Replace fuse or reset circuit breaker.

 

 

1b.

Connector plug from motor is not plugged in.

1b.

Turn off power to unit. Remove Grill and plug motor into

 

 

 

 

 

receptacle in housing. Restore power to unit.

 

 

1c.

Wiring is not connected properly.

1c.

Turn off power to unit. Check that all wires are connected.

 

 

 

 

 

 

2.

Fan is operating, but air moves slower than normal.

2.

Obstruction in the exhaust ducting.

2.

Check for any obstructions in the ducting. The most common

 

 

 

 

 

are bird nests in the roof cap or wall cap where the fan

 

 

 

 

 

exhausts to the outside.

3.

Fan is operating louder than normal.

3a.

Motor is loose.

3a.

Turn off power to unit. Remove grill and check that all screws

 

 

 

 

 

are fully tightened. Restore power to unit.

 

 

3b.

Fan blade is hitting housing of unit.

3b.

Call your dealer for service.

 

 

 

 

 

 

210572111 Rev. B 5-06

www.geelectrical.com

5 of 8

 

 

Image 5
Contents Retain Instructions for Future Reference General Safety InformationSection Screws WireCover Preparing the UnitWiring Housing JoistExisting Construction DuctingVent HeaterHot Blue Post Light Hole Slot TabUse and Care Troubleshooting GuideWhat is COVERED? WarrantyReplacement Parts Diagram 210572111 Rev. B

BFLH70L, BFLH85L specifications

The GE BFLH85L and BFLH70L are innovative refrigeration solutions designed to provide efficient food storage while offering user-friendly features and advanced technology. Both models excel in blending functionality with modern design, making them attractive additions to any kitchen.

One of the defining characteristics of both the BFLH85L and BFLH70L is their energy efficiency. Equipped with advanced cooling systems, these refrigerators are designed to minimize energy consumption while maintaining optimal temperature levels. This results in significant savings on utility bills while being environmentally friendly.

The BFLH85L boasts an impressive storage capacity, making it ideal for families or individuals who require ample space. It includes a variety of adjustable shelving options, allowing users to customize the interior layout to suit their storage needs. The model also features high-efficiency LED lighting, which illuminates the interior and provides enhanced visibility without generating excess heat.

On the other hand, the BFLH70L is slightly more compact, making it suitable for smaller kitchens or homes. Despite its smaller size, it incorporates similarly thoughtful design elements, such as flexible storage solutions and high LED lighting. Both models feature humidity-controlled crisper drawers, which help to prolong the freshness of fruits and vegetables by regulating moisture levels.

In terms of technology, the GE BFLH85L and BFLH70L come equipped with innovative temperature management systems. Such systems ensure consistent cooling throughout the refrigerator, preventing hot spots and maintaining uniformity. The smart controls enable users to monitor and adjust settings easily.

Another standout feature is the noiseless operation. Both models utilize special compressor designs that reduce noise levels, creating a more pleasant kitchen environment. Additionally, the appliances feature a sleek exterior design that integrates seamlessly with modern home aesthetics.

Safety is also prioritized in both BFLH85L and BFLH70L models. Child locks and secure shelving provide peace of mind for families. Digital temperature displays offer real-time feedback, so users can monitor internal conditions at a glance.

In conclusion, the GE BFLH85L and BFLH70L refrigerators showcase an impressive balance of size, efficiency, and modern technology. With their thoughtful design and advanced features, they meet the diverse needs of today's consumers while providing reliable and stylish food storage solutions.