Housing Joist, Existing Construction, Ducting, Wiring

ceiling. Secure the ends of the rails with screws or nails (not included) to the joists and slide housing into final position (Figure 4).

Housing
	Joist
Figure 4	Mounting Rails

1a. Mounting Tab Installation: Line up housing so that it will be flush with the finished ceiling. Position the fan so that the tabs rest flat against the joist and secure with screws or nails (not provided) to ensure proper installation (Figure 5).

1a. Mounting Tab Installation: Position housing against the joist and trace an outline of the housing onto the ceiling material (Figure 7). Set housing aside and cut opening, being careful not to cut or damage any electrical or other hidden utilities. Place housing next to the joist and insure that it is flush with the finished ceiling. Secure with screws or nails (not provided) to the joists (Figure 5).

Figure 7

Figure 5

SECTION 3

Existing Construction

1.Mounting Rail Installation: Set housing in position between the joist and trace an outline onto the ceiling material (Figure 6). Set housing aside and cut opening, being careful not to cut or damage any electrical or other hidden utilities. Install the rails on the housing and position the housing in the previously cut hole so that it is flush with the finished ceiling. Secure the ends of the rails to the joists with screws or nails (not provided) to ensure proper installation (Figure 4).

Figure 6

SECTION 4

Ducting

CAUTION: ALL DUCTING MUST COMPLY WITH LOCAL AND NATIONAL BUILDING CODES.

1.Remove any tape that might be holding the damper in place during shipping and connect the ducting to the fan’s duct collar (Figure 8). Secure in place using tape or screw clamp. Always duct the fan to the outside through a wall or roof cap.

Figure 8

SECTION 5

Wiring

CAUTION: MAKE SURE POWER IS SWITCHED OFF AT SERVICE PANEL BEFORE STARTING INSTALLATION.

WARNING: THIS UNIT MUST BE WIRED ON A SEPARATE 20 AMP CIRCUIT.

CAUTION: ALL ELECTRICAL CONNECTIONS MUST BE MADE IN ACCORDANCE WITH LOCAL CODES, ORDINANCES, OR NATIONAL ELECTRICAL CODE. IF YOU ARE UNFAMILIAR WITH METHODS OF INSTALLING ELECTRICAL WIRING, SECURE THE SERVICES OF A QUALIFIED ELECTRICIAN.

210572111 Rev. B 5-06	www.geelectrical.com	3 of 8
	www.geelectrical.com

BFLH70L, BFLH85L specifications

The GE BFLH85L and BFLH70L are innovative refrigeration solutions designed to provide efficient food storage while offering user-friendly features and advanced technology. Both models excel in blending functionality with modern design, making them attractive additions to any kitchen.

One of the defining characteristics of both the BFLH85L and BFLH70L is their energy efficiency. Equipped with advanced cooling systems, these refrigerators are designed to minimize energy consumption while maintaining optimal temperature levels. This results in significant savings on utility bills while being environmentally friendly.

The BFLH85L boasts an impressive storage capacity, making it ideal for families or individuals who require ample space. It includes a variety of adjustable shelving options, allowing users to customize the interior layout to suit their storage needs. The model also features high-efficiency LED lighting, which illuminates the interior and provides enhanced visibility without generating excess heat.

On the other hand, the BFLH70L is slightly more compact, making it suitable for smaller kitchens or homes. Despite its smaller size, it incorporates similarly thoughtful design elements, such as flexible storage solutions and high LED lighting. Both models feature humidity-controlled crisper drawers, which help to prolong the freshness of fruits and vegetables by regulating moisture levels.

In terms of technology, the GE BFLH85L and BFLH70L come equipped with innovative temperature management systems. Such systems ensure consistent cooling throughout the refrigerator, preventing hot spots and maintaining uniformity. The smart controls enable users to monitor and adjust settings easily.

Another standout feature is the noiseless operation. Both models utilize special compressor designs that reduce noise levels, creating a more pleasant kitchen environment. Additionally, the appliances feature a sleek exterior design that integrates seamlessly with modern home aesthetics.

Safety is also prioritized in both BFLH85L and BFLH70L models. Child locks and secure shelving provide peace of mind for families. Digital temperature displays offer real-time feedback, so users can monitor internal conditions at a glance.

In conclusion, the GE BFLH85L and BFLH70L refrigerators showcase an impressive balance of size, efficiency, and modern technology. With their thoughtful design and advanced features, they meet the diverse needs of today's consumers while providing reliable and stylish food storage solutions.