Installation, Wall Mount Eave Mount | Heath Zenith SL-5318 specification

INSTALLATION

For easy installation, select an existing light with a wall switch for replacement.

Wall Mount

Eave Mount

For under eave installation, the sensor head must be rotated as shown in the next two steps for proper operation and to avoid the risk of electrical shock.

For eave mount only:

❒Swing the sensor head towards the clamp screw joint.

Controls

Clamp Screw

❒Then rotate the sensor head clockwise 180° so the controls face down.

Controls

If the sensor pops out of the ball joint, loosen the clamp screw and push the sensor back into the ball joint. Tighten the clamp screw when done.

WIRE THE LIGHT CONTROL.

❒Turn power off at the fuse or circuit breaker.

❒Remove the existing light fixture.

❒Install the mounting strap as shown using two screws that fit your junction box.

❒The plastic hanger can be used to hold the fixture while wiring. The small end of the plastic hanger can be threaded through the hole in the center of the cover plate. The small end then goes into one of the slots on the mounting strap.

❒Route the Light Control’s wires through the large gasket holes.

❒Twist the junction box wires and fixture wires together as shown. Secure with wire connectors.

Mounting	Black to	White to
Strap	Black	White

Rubber

Plug

Mounting

Bolt

Gasket

Junction box ground wire to green ground screw on fixture.

MOUNT THE LIGHT CONTROL.

❒Align the Light Control cover plate and cover plate gasket. Secure with the mounting bolt.

❒Align the three slots in the decorative shell with the lamp holder pins. Push the shell in and then twist clockwise to lock. Repeat for other shell.

❒Push the Rubber Plug firmly into place.

Shell Slot

❒If a wet location junction box was not used, caulk the wall plate mounting surface with silicone weather sealant.

To avoid water damage and electrical shock, keep lamp holders 30° below horizontal.

	Keep lamps at least
	1" (2.5 cm) from the
Lock Nut	sensor. Do not al-
	low the lamps to
Lens	block the lens.

❒Adjust the lamp holders by loosening the lock nuts but do not rotate the lamp holders more than 180° from the factory setting. When screwing in the floodlamps, do not overtighten.

23456789012345678

598-1001-01

SL-5318 specifications

The Heath Zenith SL-5318 is a state-of-the-art wireless doorbell that brings both functionality and style to your home. Known for its innovative technology and elegant design, the SL-5318 offers a wide range of features aimed at enhancing your home security and convenience.

One of the standout characteristics of the SL-5318 is its customizable chime options. Users can choose from a selection of 8 different melodies, allowing you to select a sound that best suits your taste and home décor. Whether you prefer a classic ding-dong sound or a more modern chime, the options available ensure that your doorbell is tailored to your preferences.

The Heath Zenith SL-5318 also incorporates advanced technology with its wireless operation. This means there is no need for complicated wiring or installation procedures, making it an ideal option for renters or those looking to simplify installation. The wireless range is impressive, providing coverage up to 150 feet, which allows for placement of the push button and chime unit in various locations without concerns of losing connectivity.

Powering the SL-5318 is user-friendly as well. The receiver operates on AC power, while the push button runs on a standard battery, which means you won’t have to worry about frequent battery replacements. This setup ensures that you can enjoy a consistent performance throughout the year without interruptions.

Another noteworthy feature of the Heath Zenith SL-5318 is its weather-resistant design. The push button is built to withstand various weather conditions, ensuring that it remains operational even in adverse weather circumstances. This durability is essential for outdoor installations where moisture and temperature changes can be a concern.

The design of the SL-5318 is sleek and modern, making it a fitting addition to any home’s exterior. Its neutral color palette and clean lines ensure that it can blend seamlessly with any exterior design while still providing a visible and accessible entry point for visitors.

In summary, the Heath Zenith SL-5318 is a stylish and reliable wireless doorbell equipped with customizable chimes, excellent wireless range, easy installation, and a durable, weather-resistant design. This doorbell not only enhances home security but also complements the aesthetic of your home, making it an ideal choice for modern living. Whether you are looking for functionality or style, the SL-5318 is a noteworthy option that delivers on both fronts.