Test and Adjustment, Specifications | Heath Zenith SL-5318 specs

TEST AND ADJUSTMENT

❒Turn on the circuit breaker and light switch.

NOTE: Sensor has a 1 1/2 minute warm up period before it will detect motion. When first turned on, wait 1 1/2 minutes.

❒Turn the RANGE control to the mid position, Dual Brite™ to OFF and the ON-TIME control to the TEST position.

MAX
B	O	ON - TIME	DUAL BRITE

	O
	T	S
MIN
		TEST 1 5 2 0	OFF 3 6	DUSK TO
RANGE
		MINUTES	HOUR	DAWN

Bottom of Sensor

Avoid aiming the control at:

•Objects that change temperature rapidly, such as heating vents and air conditioners. These heat sources could cause false triggering.

•Areas where pets or traffic may trigger the control.

•Nearby large, light-colored objects reflecting light may trigger the shut-off feature. Do not point other lights at the sensor.

240°

8 ft.

(2.4 m)

70 ft.	100 ft.
(21 m) (30.5 m)
Boosted		Maximum

Maximum Range	Coverage Angle

The detector is less sensitive to motion directly towards it.

MotionMotion

	Sensor
Least Sensitive	Most Sensitive

❒ Loosen the clamp screw in			Clamp
the sensor ball joint and gen-			Clamp
			Screw

tly rotate the sensor.
tly rotate the sensor.
❒ Walk through the coverage			Ball
❒ Walk through the coverage
area noting where you are
area noting where you are			Joint
when the lights turn on. Move			Joint


the sensor head up, down, or
sideways to change the cov-
erage area. Keep the sen-
sor at least 1" (2.5 cm) away		Aim Sensor
from the lamps.	Down for Short
❒ Adjust the RANGE as		Coverage
needed. RANGE set too high
may increase false triggering.
may increase false triggering.
❒ Secure the sensor head by
❒ Secure the sensor head by
tightening the clamp screw.		Aim Sensor
Do not overtighten the screw.		Aim Sensor
Do not overtighten the screw.	Higher for Long
❒ Set the amount of TIME you	Higher for Long
❒ Set the amount of TIME you		Coverage
want the lights to stay on after		Coverage
want the lights to stay on after
motion is detected (1, 5, or 20 minutes).

❒Set the DUAL BRITE™ switch to the amount of time after dusk you want the lights on at low level (Off, 3, 6 Hrs., Dusk-to-Dawn).

Warning - Risk of fire. Do not aim the lamps at a combustible surface within 3 ft. (1 m).

SPECIFICATIONS

Horizontal Range . . . Up to 70 ft. (21 m); 100 ft. (30.5 m) with Range Boost. [varies with surrounding temperature]

Sensing Angle . . . . . . Up to 240°

Electrical Load . . . . . . Up to 300 Watt Maximum In- candescent [Up to 150 Watt Maximum each lamp holder.]

Power Requirements . 120 VAC, 60 Hz

Operating Modes . . . . TEST, AUTO, and MANUAL

MODE

Time Delay . . . . . . . . 1 , 5, 20 minutes

Dual Brite™ Timer . . . 3, 6 hours, Dusk-to-Dawn

DESA Specialty Products™ reserves the right to dis- continue products and to change specifications at any time without incurring any obligation to incorporate new features in products previously sold.

598-1001-01

SL-5318 specifications

The Heath Zenith SL-5318 is a state-of-the-art wireless doorbell that brings both functionality and style to your home. Known for its innovative technology and elegant design, the SL-5318 offers a wide range of features aimed at enhancing your home security and convenience.

One of the standout characteristics of the SL-5318 is its customizable chime options. Users can choose from a selection of 8 different melodies, allowing you to select a sound that best suits your taste and home décor. Whether you prefer a classic ding-dong sound or a more modern chime, the options available ensure that your doorbell is tailored to your preferences.

The Heath Zenith SL-5318 also incorporates advanced technology with its wireless operation. This means there is no need for complicated wiring or installation procedures, making it an ideal option for renters or those looking to simplify installation. The wireless range is impressive, providing coverage up to 150 feet, which allows for placement of the push button and chime unit in various locations without concerns of losing connectivity.

Powering the SL-5318 is user-friendly as well. The receiver operates on AC power, while the push button runs on a standard battery, which means you won’t have to worry about frequent battery replacements. This setup ensures that you can enjoy a consistent performance throughout the year without interruptions.

Another noteworthy feature of the Heath Zenith SL-5318 is its weather-resistant design. The push button is built to withstand various weather conditions, ensuring that it remains operational even in adverse weather circumstances. This durability is essential for outdoor installations where moisture and temperature changes can be a concern.

The design of the SL-5318 is sleek and modern, making it a fitting addition to any home’s exterior. Its neutral color palette and clean lines ensure that it can blend seamlessly with any exterior design while still providing a visible and accessible entry point for visitors.

In summary, the Heath Zenith SL-5318 is a stylish and reliable wireless doorbell equipped with customizable chimes, excellent wireless range, easy installation, and a durable, weather-resistant design. This doorbell not only enhances home security but also complements the aesthetic of your home, making it an ideal choice for modern living. Whether you are looking for functionality or style, the SL-5318 is a noteworthy option that delivers on both fronts.