Heath Zenith 6157 manual Tune Settings

Tune Settings

WARNING: Disconnect chime unit from power source before opening code access door. Close door and replace screw before reconnecting to power.

Your wireless chime has different selectable tunes: Ding (one note), Ding-Dong(two note), or Westminster (eight note) (Available on selected chimes). The factory setting is for the Ding-Dong tune (or Westminster, when available). This tune can be changed by following the instructions below.

•Ding (one note tune)

Inside Chime Extender: Add a jumper to location 8.

•Ding-Dong(two note tune)

Inside Chime Extender: Remove jumper from location 8.

Chime: Remove jumper from location 8.

•Westminster (Eight note tune) (Available on selected chimes) Inside Chime Extender: Remove jumper from location 8. Chime: Add a jumper to location 8.

Note: All models have both front and back door tune capabilities. We recom- mend the back door use the Ding tune and the front door use the Ding-Dongtune (or Westminster tune, available on selected chimes). You may purchase any ACE® wireless push button for a second entrance.

Remove

screw to open

access door

12345678

Tune Setting (Not used

on all models)

1234 5 6 7 8

Tune Setting

Back of Chime

Inside

Chime

Extender

Note: Some models might require the use of tweezers to remove and replace the jumpers.

Figure 7

598-1070-04 -5-