Test and Adjustment, Specifications | Heath Zenith SL-5309 specs

TEST AND ADJUSTMENT

❒Turn on the circuit breaker and light switch.

NOTE: Sensor requires about 1 1/2 minutes to calibrate before it will detect motion. When first turned on, wait about 1 1/2 minutes.

❒Turn the SENSITIVITY (SENS) control to the mid position and the ON-TIME control to the TEST position.

ON-TIME	SENS
10 5 1 TEST	MIN MAX

Bottom of Sensor

Avoid aiming the control at:

❒Loosen the clamp screw in the sensor ball joint and gen- tly rotate the sensor to aim.

❒Walk through the coverage area noting where you are when the lights turn on. Move the sensor head up, down, or sideways to change the coverage area.

❒SetSENSITIVITYasneeded. Too much sensitivity may in- crease false triggering.

❒Secure the sensor head into position by tighten- ing the clamp screw. Do not overtighten the screw.

❒Set the amount of TIME the lights stay on after motion is detected.Itisselectablefrom 1, 5, or 10 minutes.

Clamp

Screw

Ball

Joint

Aim Sensor Down for Short Coverage

Aim Sensor

Higher for Long

Coverage

•Objects that change temperature rapidly, such as heating vents and air conditioners. These heat sources could cause false triggering.

•Areas where pets or traffic may trigger the control.

•Nearby large, light-colored objects reflecting light may trigger the shut-off feature. Do not point other lights at the sensor.

	110°
8 ft.
(2.4 m)
	60 ft.
	(18.3 m)
Maximum	Maximum
Range	Coverage Angle

The control is most sensitive to motion across it.

MotionMotion

Sensor

Least Sensitive

Most Sensitive

SPECIFICATIONS

Range . . . . . . . . . . . . . Up to 60 ft. (18.3 m); [varies with surrounding temperature]

Sensing Angle . . . . . . . Up to 110°

Electrical Load . . . . . . . Up to 300 Watts Maximum Tungsten

Power Requirements . . 120 VAC, 60 Hz

Operating Modes . . . . . TEST, AUTO and MANUAL

MODE

Time Delay . . . . . . . . . 1, 5 or 10 minutes Sensitivity . . . . . . . . . . Adjustable

Replacement lamp . . . T 300W (or less) halogen 120

VAC

DESA Specialty Products™ reserves the right to dis- continue products and to change specifications at any time without incurring any obligation to incorporate new features in products previously sold.

595-5496-06

SL-5309 specifications

The Heath Zenith SL-5309 is an innovative motion sensor security light designed to enhance outdoor safety and convenience. This smart lighting solution combines advanced technology with user-friendly features, making it an ideal addition to residential properties.

One of the standout features of the SL-5309 is its dual-brightness functionality. It can emit a soft glow during low-light conditions, activating to full brightness when motion is detected. This not only conserves energy but also provides users with a welcoming light that automatically intensifies when needed, ensuring safety without being overly obtrusive.

The motion sensor capabilities of the SL-5309 are powered by passive infrared (PIR) technology, which allows the device to detect movement within a specified range. The adjustable detection settings enable users to customize the sensor's sensitivity and the distance at which it responds to motion, providing flexibility based on individual requirements and outdoor layouts. With a detection range of approximately 180 degrees and up to 30 feet, the SL-5309 ensures a broad coverage area, enhancing the security of homes and properties.

Another notable characteristic of the Heath Zenith SL-5309 is its weather-resistant design. Made with durable materials, this outdoor light is built to withstand various environmental conditions, including rain, snow, and extreme temperatures. Its robust construction ensures long-lasting performance, making it a reliable choice for outdoor lighting.

Installation of the SL-5309 is straightforward, as it features a simple mounting system that allows users to secure the light in various outdoor locations, such as driveways, patios, or entryways. The product comes with necessary hardware and a user-friendly manual, ensuring a hassle-free setup process.

Additionally, the Heath Zenith SL-5309 incorporates an energy-efficient LED bulb that not only offers bright illumination but also reduces power consumption compared to traditional lighting sources. LED technology promotes longevity and decreases the need for frequent bulb replacements, making the SL-5309 an eco-friendly choice.

Overall, the Heath Zenith SL-5309 is a versatile and efficient outdoor lighting solution. With its intelligent motion sensing, adjustable settings, weather-resistant design, and energy-efficient LED, this security light enhances both safety and convenience for homeowners. Whether illuminating dark pathways or providing security after dark, the SL-5309 stands out as a reliable and stylish addition to any outdoor space.