Heath Zenith SL-5309 manual Technical Service, Troubleshooting Guide, Do Not Send Products

Page 4

TECHNICAL SERVICE

(Do Not Send Products)

If you experience a problem, follow this guide. You may also want to visit our Web site at: www.desatech.com. If the problem persists, call* for assistance at 1-800-858-8501,7:30 AM to 4:30 PM CST (M-F). You may also write* to: DESA Specialty Products™

P.O. Box 90004, Bowling Green, KY 42102-9004 ATTN: Technical Service Specialty Products

*If contacting Technical Service, please have the following information available: Model Number, Date of Purchase, and Place of Purchase.

No Service Parts Available for this Product

TROUBLESHOOTING GUIDE

SYMPTOM

POSSIBLE CAUSE

 

 

Light will not come

1. Light switch is turned off.

on.

2.

Halogen lamp is loose or burned

 

 

out.

 

3.

Fuse is blown or circuit breaker

 

 

is turned off.

 

4.

Daylight turn-off is in effect.

 

 

(Recheck after dark.)

 

5.

Incorrect circuit wiring, if this is

 

 

a new installation.

 

6.

Not aimed correctly. (Re-aim the

 

 

sensor to cover desired area.)

 

 

Light comes on in

1. Light Control may be installed

daylight.

 

in a relatively dark location.

 

2.

Light Control is in TEST. (Select

 

 

1, 5 or 10 minutes for AUTO time.)

 

 

Light comes on for

1. Light Control’s sensor may be

no apparent reason.

 

detecting small animals, sway-

 

 

ing trees, or automobile traffic.

 

 

(Re-aim sensor.)

 

2.

Sensitivity is set too high. (Re-

 

 

duce sensitivity.)

 

 

 

SYMPTOM

POSSIBLE CAUSE

 

 

 

Light stays on

1.

The halogen lamp is positioned

continuously.

 

too close to the Light Control's

 

 

sensor or pointed at nearby objects

 

 

that cause heat to trigger the

 

 

sensor. (Reposition the lamp away

 

 

from the sensor or nearby objects.)

 

2.

Light Control's sensor is pointed

 

 

toward a heat source like an air

 

 

vent, dryer vent, or brightly-painted

 

 

heat-reflective surface. (Reposition

 

 

sensor.)

 

3.

LIght Control is in Manual Mode.

 

 

(Switch to Auto.)

 

 

Light flashes on

1. Heat or light from the halogen lamp

and off.

 

may be turning the Light Control

 

 

on and off. (Reposition the lamp

 

 

away from the sensor.)

 

2.

Heat being reflected from other

 

 

objects may be affecting the Light

 

 

Control. (Re-aim sensor).

 

3.

Light Control is in the TEST mode

 

 

and warming up. (Flashing is

 

 

normal under these conditions.)

 

 

 

ONE YEAR LIMITED WARRANTY

This is a "Limited Warranty" which gives you specific legal rights. You may also have other rights which vary from state to state or province to province.

For a period of one year from the date of purchase, any malfunction caused by factory defective parts or workmanship will be corrected at no charge to you. Light bulbs are not covered. To obtain a refund or a replacement, return the product to the place of purchase.

Not Covered - Repair service, adjustment and calibration due to misuse, abuse or negligence, light bulbs and other expendable items are not covered by this warranty. Unauthorized service or modification of the product or of any furnished component will void this warranty in its entirety. This warranty does not include reimbursement for inconvenience, installation, setup time, loss of use, or unauthorized service.

This warranty covers only DESA Specialty Products™ assembled products and is not extended to other equipment and components that a customer uses in conjunction with our products.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY, REPRESENTATION OR CONDITION OF MERCHANT ABILITY OR THAT THE PRODUCTS ARE FIT FOR ANY PARTICULAR PURPOSE OR USE, AND SPECIFICALLY IN LIEU OF ALL SPECIAL, INDIRECT, INCIDEN- TAL, OR CONSEQUENTIAL DAMAGES.

REPAIR OR REPLACEMENT SHALL BE THE SOLE REMEDY OF THE CUSTOMER AND THERE SHALL BE NO LIABILITY ON THE PART OF DESA SPECIALTY PRODUCTS™ FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO ANY LOSS OF BUSINESS OR PROFITS, WHETHER OR NOT FORESEEABLE. Some states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Retain receipt for warranty claims.

4

595-5496-06

Image 4
Contents Installation OperationModel SL-5309 RequirementsWire the Light Control Bulb Installation and RelampingRightwrong Mount the Light ControlTest and Adjustment SpecificationsTurn on the circuit breaker and light switch Avoid aiming the control atTechnical Service Troubleshooting GuideSymptom Possible Cause Do Not Send ProductsFuncionamiento InstalacionModelo SL-5309 Resumen de las modalidades del interruptorConecte EL Control DE LUZ Instale EL Control DE LUZCorrectoincorrecto Instalación Y Cambio DE BombillaPrueba Y Ajuste EspecificacionesServicio Técnico Guia DE Investigacion DE AveriasNo enviar los productos Garantía Limitada a 1 AÑORésumé du mode de commutation FonctionnementModèle SL-5309 ExigencesCâblage DE LA Commande D’ÉCLAIRAGE Montage DE LA Commande D’ÉCLAIRAGEInstallation ET Remplacement DE L’AMPOULE CorrectincorrectFiche Technique Essais ET RéglagesBas du détecteur Éviter de pointer l’appareil Service Technique Guide DE DépannageNenvoyez pas de produits Garantie Limitée DE 1 AN
Related manuals
Manual 12 pages 57.97 Kb

SL-5309 specifications

The Heath Zenith SL-5309 is an innovative motion sensor security light designed to enhance outdoor safety and convenience. This smart lighting solution combines advanced technology with user-friendly features, making it an ideal addition to residential properties.

One of the standout features of the SL-5309 is its dual-brightness functionality. It can emit a soft glow during low-light conditions, activating to full brightness when motion is detected. This not only conserves energy but also provides users with a welcoming light that automatically intensifies when needed, ensuring safety without being overly obtrusive.

The motion sensor capabilities of the SL-5309 are powered by passive infrared (PIR) technology, which allows the device to detect movement within a specified range. The adjustable detection settings enable users to customize the sensor's sensitivity and the distance at which it responds to motion, providing flexibility based on individual requirements and outdoor layouts. With a detection range of approximately 180 degrees and up to 30 feet, the SL-5309 ensures a broad coverage area, enhancing the security of homes and properties.

Another notable characteristic of the Heath Zenith SL-5309 is its weather-resistant design. Made with durable materials, this outdoor light is built to withstand various environmental conditions, including rain, snow, and extreme temperatures. Its robust construction ensures long-lasting performance, making it a reliable choice for outdoor lighting.

Installation of the SL-5309 is straightforward, as it features a simple mounting system that allows users to secure the light in various outdoor locations, such as driveways, patios, or entryways. The product comes with necessary hardware and a user-friendly manual, ensuring a hassle-free setup process.

Additionally, the Heath Zenith SL-5309 incorporates an energy-efficient LED bulb that not only offers bright illumination but also reduces power consumption compared to traditional lighting sources. LED technology promotes longevity and decreases the need for frequent bulb replacements, making the SL-5309 an eco-friendly choice.

Overall, the Heath Zenith SL-5309 is a versatile and efficient outdoor lighting solution. With its intelligent motion sensing, adjustable settings, weather-resistant design, and energy-efficient LED, this security light enhances both safety and convenience for homeowners. Whether illuminating dark pathways or providing security after dark, the SL-5309 stands out as a reliable and stylish addition to any outdoor space.