Panasonic CQ-C1103U Maintenance, Anti-Theft System, Cleaning the Unit Fuse, Removing, Mounting

Page 5

Maintenance

Cleaning the Unit

Fuse

Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for routine exterior cleaning. Never use benzine, thinner, or other solvents.

If the replaced fuse fails, contact your nearest authorized Panasonic Servicenter.

Warning

¡Use fuses of the same specified rating (15 A). Using substitutes or fuses with higher ratings, or connecting the unit directly without a fuse could cause fire or damage to the unit. If the replaced fuse fails, contact your nearest authorized Panasonic Servicenter.

Anti-Theft System

This unit is equipped with a removable face plate. Removing this face plate makes the unit totally inoperable.

Caution

¡This face plate is not waterproof. Do not expose it to water or excessive moisture.

¡Do not remove the face plate while driving your car.

¡Do not place the face plate on the dashboard or nearby areas where the temperature rises high.

¡Do not touch the contacts on the face plate and the main unit, since this may result in poor electrical contact.

¡If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth.

Face Plate Removing/Mounting

(Anti-Theft System)

Removing

1 Turn off the power.

2 Press [ ]. The face plate will open. 3 Pull it out toward you.

Mounting

1 Slide the left side of the face plate in place.

2 Press the right end of the face plate until a “click” is heard.

[ ]

Image 5
Contents Model CQ-C1103U Accessory Purchases Customer Services DirectoryService in Puerto Rico Panasonic Factory ServicePanasonic Product Limited Warranty Limited WarrantyPanasonic Auto Products Limited Warranty Clock Display at Power Off Clock SettingTurn the ignition switch until PreparationCleaning the Unit Fuse MaintenanceAnti-Theft System RemovingObserve the following warnings when installing Safety InformationRefer fuse replacement to qualified service personnel Insulate all exposed wires to prevent short circuitingThis Product is a Class I Laser Product Observe the following cautions when installingPart 15 of the FCC Rules General Operations GeneralAudio Audio SettingMenu Preset station selection Frequency adjustmentRadio AM/FM Operation FlowDirect Memory Radio Mode DisplayStation Preset Track selection Disc PlayerPause Direct track selectionRandom, Repeat, Scan Player Mode DisplayRandom play Repeat playError Display Messages TroubleshootingCommon Disc PlayerMemorandum General SpecificationsFM Stereo Radio AM Radio